On-Screen Display Menu
On-Screen Display Menu Operation
Example |
|
| |||
Picture |
|
|
|
|
|
OPC |
|
| Off | On | On : Display |
Backlight | [b12] a16 |
| b16 | ||
Contrast | [b30] | 0 |
| b40 | |
Brightness | [ | 0] | a30 |
| b30 |
Color | [ | 0] | a30 |
| b30 |
Tint | [ | 0] | a30 |
| b30 |
Sharpness | [ | b2] | a10 |
| b10 |
Advanced |
|
|
|
|
|
Reset |
|
|
|
|
|
: Select ENTER : Enter RETURN : Back MENU : Exit
The bar above is an operational guide for the remote control. The bar will change in accordance with each menu setting screen.
1Press MENU to display the MENU screen.
2 1 Press c/d to select the desired menu.
2 Press a/b to select a specifi c adjustment item, and then press ENTER.
3 Press a/b (or c/d) to select or adjust the desired setting, and then press ENTER.
3Press MENU to exit.
Example
Option
Audio Only
PC Audio Select [Input 4 (PC)]
| Output select | [Fixed] |
| ||
|
| ||||
| Caption Setup |
|
|
|
|
|
|
|
| ||
| Digital Caption Info. |
|
|
| |
|
|
| |||
| Program Title Display | [No] |
| ||
| Favorite CH |
|
| ||
| Operation Lock Out | [Off] |
| ||
|
|
|
|
|
|
1 Item displayed in yellow
•This indicates the item currently selected.
•Press ENTER to go to the adjustment screen for this item.
2 Item in brackets
• This indicates the current setting for the item.
3 Item displayed in white
• This indicates that the item can be selected.
4 Item displayed in gray
• This indicates that the item cannot be selected. There are various reasons why the items cannot be selected, but the main reasons are as follows:
signal.
•Menu options differ in the selected input modes, but the operating procedures are the same.
•The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens.
Menu Operation Buttons
Using the remote control
Use the following buttons on the remote control to operate the menu.
MENU: Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the screen or adjust a selected item.
ENTER: Press to go to the next step or complete the setting.
RETURN: Press to return to the previous step.
Using the control panel of the main unit
You can also operate the menu with the control panel of the main unit.
Button operations on the control panel correspond to the ones on the remote control as shown below.
MENU: MENU on the remote control.
INPUT: ENTER on the remote control.
CHU/V: Cursor a/b on the remote control.
VOLk/l: Cursor c/d on the remote control.
17