Sharp LC 52SB55U Fine Sync, Position, Language Reset, Parental Ctrl Parental Control Setting

Page 21

On-Screen Display Menu

Fine Sync.

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image.

H-Pos.:Centers the image by moving it to the left or right.

V-Pos.:Centers the image by moving it up or down.

Clock: Adjust when the image fl ickers with vertical stripes.

Phase: Adjust when characters have low contrast or when the image fl ickers.

For resetting all Fine Sync. adjustment items to the factory preset values, press a/b to select "Reset", and then press

ENTER.

It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it cannot be selected.

The default cursor position may not be in the center, because the screen position variable ranges may be asymmetrical.

The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen.

Position

For adjusting a picture's horizontal and vertical position.

H-Pos.:Centers the image by moving it to the left or right.

V-Pos.:Centers the image by moving it up or down.

For resetting adjustments to the factory preset values, press a/b to select "Reset", and then press ENTER.

When connecting a PC to the HDMI terminal, the image position will be automatically adjusted. It cannot be manually adjusted.

The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen.

Adjustments are stored separately according to input source.

Language

Reset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1"Return to the factory preset values" displays on the screen.

If you have already set the Secret No., input the 4-digit secret number here.

2Select "Yes".

"Now, TV will restart automatically. OK?" displays on the screen.

3Select "Yes".

"Now initializing..." displays on the screen and blinks. After the reset has been completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

The Channel Setup settings will not be changed.

The Language settings will not be changed.

The Secret number settings will not be changed.

The TV Location Settings will not be changed.

Parental CTRL

(Parental Control Setting)

Secret No.

Allows you to use a secret number to protect certain settings from being accidentally changed.

IMPORTANT:

Three conditions must be met to enable the V-Chip (see pages 21 to 23):

1.Secret No. is registered.

The “V-Chip (DTV Only)” will only be selectable when a new rating system can be downloaded via digital broadcasting in the U.S.

2.V-Chip/V-Chip (DTV Only) settings have been made.

3."Status" is set to "On".

New Secret No.

You can set and change the secret number by using 09.

Input Secret No.: When you change the secret number, enter the old 4-digit secret number here. The cursor

You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish.

moves to "New Secret No.".

New Secret No.: When you set the new secret number, enter the new 4-digit secret number here. The cursor moves to "Reconfi rm".

Reconfirm: Enter the same 4-digit number you set in "New Secret No.".

Secret No. Clear

You can clear your secret number.

Yes: Your secret number is cleared.

No: Your secret number is not cleared.

As a precautionary measure, make a note of your secret number and keep it in a familiar place.

If the secret number is cleared, the Status setting automatically sets to "Off". "V-Chip" and "Status" will not be selectable from the menu.

21

Image 21
Contents LC-52SB55U Supplied Accessories08P06-MX-NM For connectionsImportant Information Dear Sharp Customer Additional Safety InformationPrecautions when transporting the TV Child Safety Using an optional bracket to mount the TV Setting the TV on the WallAbout setting the TV angle Attaching/Detaching the StandUsing the Remote Control Unit Press Power on the televisionPower indicator on the front of the television lights Green Connecting Antenna Cable Installing Batteries in the Remote Control UnitPreparation AntennasTV Front Part NamesTV Rear/Side Input buttonConnecting a PC Connecting to External EquipmentTurning On/Off the Power Initial SetupWatching TV Sleep Timer Changing VolumeDirect Button Operation Changing ChannelsMTS/SAP stereo mode Press AV MODE. Current AV Mode displaysDigital broadcasting audio mode Direct Button OperationPress Input again or press a/b to select the input source Press InputOperating On-Screen Display Menu Displays channel information being viewed. Press DisplayFor PC input mode Press View ModeYou can select the screen size For 43 programsUsing the control panel of the main unit Using the remote controlOn-Screen Display Menu On-Screen Display Menu OperationOPC Setting Advanced Picture SettingPicture Menu Audio Menu Power Control MenuSetup Menu Parental Ctrl Parental Control Setting Language ResetFine Sync PositionChip On-Screen Display Menu StatusMpaa Voluntary movie rating system TV Parental GuidelinesCanadian English Ratings How to temporarily release the V-CHIP BlockCanadian French Ratings Reactivating the temporarily released V-CHIP BlockOption Menu Digital Setup During the data checking, Checking blinks Input the 4-digit secret number by usingPress Enter to start updating After the screen shown below is displayed, pressTroubleshooting-Digital Broadcasting TroubleshootingError message about reception of broadcast AppendixRS-232C Port Specifications Specifications Optional AccessoryModel LC-52SB55U Part name Model number Wall mount bracketInformation on the Software License for This Product PC Compatibility ChartLimited Warranty Calling for Service