Direct Button Operation
Changing Volume
You can change the volume by pressing VOLk/l on the TV or on the remote control unit.
• To increase the volume, press VOLk.
• To decrease the volume, press VOLl.
20 |
Audio status
Output device | Output Select | |
| Fixed | Variable |
Speaker | Variable sound | Mute |
• When "Output Select" is set to "Variable", the indicator on the screen changes as shown below.
60 |
POWER
You can turn on the TV or put it on standby by pressing POWER on the TV or on the remote control unit. (See page 12.)
Changing Channels
You can change channels by pressing CHU/V or
•(DOT).
Examples:
To select a 1 or
Press 5 ENT.
To select a
Press 1 1 5 ENT.
To select a
Press 2 2 • (DOT) 1 ENT.
•When selecting a
•When you enter
•If you push "0" by itself, nothing will happen.
•Complete the above steps within a few seconds.
•When you enter
FAVORITE CH
You can select 4 preset favorite channels in 4 different categories.
Press A, B, C or D.
•While watching the TV, you can toggle the selected channels by pressing A, B, C and D.
•See page 25 for details of favorite channel settings.
• See page 24 for details on the Output Select function.
MUTE
Mutes the current sound output.
Press MUTE.
•" " will be displayed on the screen for 30 minutes, and the sound is silenced.
•Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below.
- Mute will be canceled if you press VOLk/l or MUTE.
•Mute will be canceled after 30 minutes have passed. However, the TV will not suddenly output a loud sound as the volume level is set to 0 automatically.
Sleep Timer
Allows you to set a time when the TV automatically switches to standby.
Press SLEEP.
•The remaining time displays when the sleep timer has been set.
•Each time you press SLEEP, the remaining time switches as shown below.
Off 30 60 90 120
•When set, the time automatically starts counting down.
•If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.
•Five minutes before the time expires, the remaining time displays every minute.
•Select "Off" by pressing SLEEP to cancel the sleep timer.
•The TV will enter standby when the remaining time reaches zero.
•When the sleep timer is set, its indicator on the TV lights red.
FLASHBACK
Press FLASHBACK to switch to the previously tuned channel.
•Press FLASHBACK again to switch back to the currently tuned channel.
•FLASHBACK will not work if no channel has been changed after the TV is turned on.
13