On-Screen Display Menu
Digital Noise Reduction
Produces a clearer video image.
Off: No adjustment
High/Middle/Low: Select a desired level for viewing a clearer video image.
•"Digital Noise Reduction" is not selectable when channel display shows an input resolution of 1080P.
3D-Y/C
Provides high quality images with minimal dot crawl and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off (2D): For Game Mode.
•
Monochrome
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
Range of OPC
The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of
Max.:
Min.:
•The range of OPC settings are active only when the OPC is set to "On".
•The maximum setting cannot be set to a smaller number than the minimum setting.
•The minimum setting cannot be set to a bigger number than the maximum setting.
•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.
Surround
Surround function allows you to enjoy realistic "live" sound.
On: Surround function is on.
Off: Normal sound.
•Audio menu is grayed out when Output Select is set to "Variable".
•For some discs, setup may be required on your DVD player. In this case, please refer to the operation manual of your DVD player.
Bass Enhancer
This function allows you to enjoy
On: Bass Enhancer function is on.
Off: Normal sound.
•Audio menu is grayed out when Output Select is set to "Variable".
Power Control Menu
Power control setting allows you to save energy.
Power Saving
This function allows you to automatically reduce the backlight brightness in order to decrease the power consumption and increase the backlight lifespan.
Standard: Reduces the backlight brightness to 80%.
When set to “Standard”, “
” appears on the screen. Advanced: Reduces the backlight brightness to 70%.
When set to “Advanced”, “
” appears on the screen.
Off: The backlight brightness is the same value of your settings in the selected AV MODE.
•“Power Saving” does not function when you set “AV MODE” to “DYNAMIC (Fixed)”.
•When “OPC” is set to “On” or “On:Display” while “Power Saving” is set to “Standard” or “Advanced”, the Power Saving leaf icon appears to the left of “OPC” in the Picture menu screen.
•When “OPC” is set to “Off” while “Power Saving” is set to “Standard” or “Advanced”, the Power Saving leaf icon appears to the left of “Backlight” in the Picture menu screen.
Audio Menu
You can adjust the sound quality to your preference with the following settings.
Selected item | cbutton | dbutton |
Treble | For weaker treble | For stronger treble |
|
|
|
Bass | For weaker bass | For stronger bass |
|
|
|
Balance | Decrease audio from | Decrease audio from |
| the right speaker | the left speaker |
•Audio menu is grayed out when Output Select is set to "Variable".
•For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press c/d to select "Yes", and then press ENTER.
No Signal Off
When set to"Enable", the power will automatically shut down if there is no signal for 15 minutes.
•Five minutes before the power shuts down, the remaining time displays every minute.
•"Disable" is the factory preset value.
•When a TV program fi nishes, this function may not operate.
No Operation Off
When set to "Enable", the power will automatically shut down if there is no operation for 3 hours.
•Five minutes before the power shuts down, the remaining time displays every minute.
•"Disable" is the factory preset value.
19