Sharp LC 52SB55U operation manual Setup Menu

Page 20

On-Screen Display Menu

Setup Menu

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language: Select from among 3 languages (English, French and Spanish).

TV Location: Select "Home" or "Store" for the location where you plan to install the TV.

If you select "Home", AV MODE is set to "STANDARD".

If you select "Store", AV MODE is set to "DYNAMIC (Fixed)". If there is no operation for 30 minutes, AV MODE will return to "DYNAMIC (Fixed)" automatically, regardless of previous changes to the AV MODE settings.

Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for all channels viewable in the set area.

See "Initial Setup" on page 12 for setting each item.

If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.

If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.

CH Setup

If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for all channels viewable in the set area.

CH Memory: You can select the channels to skip in each ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable).

On: Skips channels. (Channel selection disabled using CH U/V.)

Off: Does not skip channels. (Channel selection enabled using CHU/V.)

Remove Scrambled CH: This function makes the TV look for and then delete digital cable channels that are scrambled and so unavailable in the set area. The process may take more than 20 minutes.

Yes: Starts to remove scrambled channels.

No: This function does not work.

Antenna Setup - DIGITAL

In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confi rm the antenna confi guration through the "Antenna Setup - DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength.

Signal Strength: The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel.

Channel Strength: Input the 2-digit channel number to check the signal strength of the selected channel. Make sure the signal is strong enough for each channel.

• This function is available for DIGITAL (Air) only.

Input Skip

This setting allows you to skip the HDMI or PC-IN Input ("Input 4 (PC)", "Input 5 (HDMI)", "Input 6 (HDMI)", "Input 7 (HDMI)" and "Input 8 (HDMI)") on the Input Selection operation.

Yes: Skips the input.

No: Does not skip input.

Input Label

Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press a/b/c/d to select the new name for the input mode.

• You cannot change labels if the INPUT SOURCE is TV.

Input Signal

(for Analog PC Input Mode Only)

Some input signals may have to be registered manually to display properly. The pair of input signals (resolutions) in the list below is not distinguishable when received.

In such a case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.

1024 x 768

1360 x 768

You can only select the "Input Signal" on the Setup menu when receiving one of the 2 input signals listed above.

See "Initial Setup" on page 12 for setting each item.

If no channel is found, confi rm the type of connection made with your TV and try channel search again.

If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.

Auto Sync.

(for Analog PC Input Mode Only)

For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image." displays.

No: This function does not work.

When Auto Sync. is successful, "Completed" displays. If not, Auto Sync. failed.

Auto Sync. may fail even if "Completed" displays.

Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync.

Be sure to connect the PC to the TV and switch it on before starting Auto Sync.

20

Image 20
Contents Supplied Accessories LC-52SB55UFor connections 08P06-MX-NMImportant Information Additional Safety Information Dear Sharp CustomerPrecautions when transporting the TV Child Safety Setting the TV on the Wall Using an optional bracket to mount the TVAbout setting the TV angle Attaching/Detaching the StandPower indicator on the front of the television lights Green Using the Remote Control UnitPress Power on the television Installing Batteries in the Remote Control Unit Connecting Antenna CablePreparation AntennasPart Names TV FrontTV Rear/Side Input buttonConnecting to External Equipment Connecting a PCWatching TV Turning On/Off the PowerInitial Setup Changing Volume Sleep TimerDirect Button Operation Changing ChannelsPress AV MODE. Current AV Mode displays MTS/SAP stereo modeDigital broadcasting audio mode Direct Button OperationPress Input Press Input again or press a/b to select the input sourceOperating On-Screen Display Menu Displays channel information being viewed. Press DisplayPress View Mode For PC input modeYou can select the screen size For 43 programsUsing the remote control Using the control panel of the main unitOn-Screen Display Menu On-Screen Display Menu OperationPicture Menu OPC SettingAdvanced Picture Setting Power Control Menu Audio MenuSetup Menu Language Reset Parental Ctrl Parental Control SettingFine Sync PositionOn-Screen Display Menu Status ChipMpaa Voluntary movie rating system TV Parental GuidelinesHow to temporarily release the V-CHIP Block Canadian English RatingsCanadian French Ratings Reactivating the temporarily released V-CHIP BlockOption Menu Digital Setup Input the 4-digit secret number by using During the data checking, Checking blinksPress Enter to start updating After the screen shown below is displayed, pressTroubleshooting Troubleshooting-Digital BroadcastingError message about reception of broadcast AppendixRS-232C Port Specifications Optional Accessory SpecificationsModel LC-52SB55U Part name Model number Wall mount bracketPC Compatibility Chart Information on the Software License for This ProductCalling for Service Limited Warranty