Sharp LC 52SB55U Preparation, Antennas, Installing Batteries in the Remote Control Unit

Page 9

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).

2.A 300-ohm system is a fl at “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available).

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (fl at)

NOTICE F-type connector should be finger-tightened only.

When connecting the RF cable to the TV set, do not tighten F-type connector with tools.

If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.)

Connecting Antenna Cable

F-type connector

75-ohm coaxial cable

Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).

1Cable without a CATV converter

2VHF/UHF antenna

3Combination VHF/ UHF antenna

4Separate VHF/UHF antenna

 

 

 

Home Antenna

 

Cable TV lead-In

 

terminal (75-ohm)

 

 

 

 

 

 

 

Coaxial cable

 

 

 

(commercially available)

 

 

 

Home Antenna

 

75-ohm coaxial cable (round)

terminal (75-ohm)

 

 

 

 

 

 

Coaxial cable

 

 

 

(commercially available)

 

75-ohm coaxial cable (round)

 

 

 

 

 

or

 

 

 

 

300/75-ohm adapter

 

300-ohm twin-lead cable (flat)

(commercially available)

 

 

 

 

UHF

300-ohm

 

 

VHF

ANTENNA

 

 

twin-lead cable

IN

OUT

 

ANTENNA

 

 

 

 

 

 

 

Combiner

 

 

 

(commercially available)

 

300-ohm twin-lead cable

 

To TV antenna

 

 

 

 

or 75-ohm coaxial cable

 

terminal

 

 

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1 Open the battery cover.

2 Insert two “AA” size batteries

3 Close the battery cover.

 

(supplied with the product).

 

Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

Do not mix batteries of different types. Different types of batteries have different characteristics.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.

The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

If you will not be using the remote control unit for an extended period of time, remove batteries from it.

9

Image 9
Contents LC-52SB55U Supplied Accessories08P06-MX-NM For connectionsImportant Information Dear Sharp Customer Additional Safety InformationPrecautions when transporting the TV Child Safety Using an optional bracket to mount the TV Setting the TV on the WallAbout setting the TV angle Attaching/Detaching the StandUsing the Remote Control Unit Press Power on the televisionPower indicator on the front of the television lights Green Connecting Antenna Cable Installing Batteries in the Remote Control UnitPreparation AntennasTV Front Part NamesTV Rear/Side Input buttonConnecting a PC Connecting to External EquipmentTurning On/Off the Power Initial SetupWatching TV Sleep Timer Changing VolumeDirect Button Operation Changing ChannelsMTS/SAP stereo mode Press AV MODE. Current AV Mode displaysDigital broadcasting audio mode Direct Button OperationPress Input again or press a/b to select the input source Press InputOperating On-Screen Display Menu Displays channel information being viewed. Press DisplayFor PC input mode Press View ModeYou can select the screen size For 43 programsUsing the control panel of the main unit Using the remote controlOn-Screen Display Menu On-Screen Display Menu OperationOPC Setting Advanced Picture SettingPicture Menu Audio Menu Power Control MenuSetup Menu Parental Ctrl Parental Control Setting Language ResetFine Sync PositionChip On-Screen Display Menu StatusMpaa Voluntary movie rating system TV Parental GuidelinesCanadian English Ratings How to temporarily release the V-CHIP BlockCanadian French Ratings Reactivating the temporarily released V-CHIP BlockOption Menu Digital Setup During the data checking, Checking blinks Input the 4-digit secret number by usingPress Enter to start updating After the screen shown below is displayed, pressTroubleshooting-Digital Broadcasting TroubleshootingError message about reception of broadcast AppendixRS-232C Port Specifications Specifications Optional AccessoryModel LC-52SB55U Part name Model number Wall mount bracketInformation on the Software License for This Product PC Compatibility ChartLimited Warranty Calling for Service