Sharp LC C4067U Picture Menu, On-Screen Display Menu, OPC Setting, Advanced Picture Setting

On-Screen Display Menu

Picture Menu

Adjusts the picture to your preference with the following picture settings.

Selected item	cbutton	dbutton
Backlight	The screen dims	The screen
		brightens
Contrast	For less contrast	For more contrast
Brightness	For less	For more
	brightness	brightness
Color	For less color	For more color
	intensity	intensity
Tint	Skin tones	Skin tones
	become reddish	become greenish
Sharpness	For less	For more
	sharpness	sharpness

•For resetting all Picture adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press a/b to select "Yes", and then press ENTER.

OPC Setting

Automatically adjusts the brightness of the screen.

On(Display): Displays the OPC effect on the screen while adjusting the brightness of the screen.

On: Automatically adjusts.

Off: The brightness is fi xed at the value set in "Backlight".

•When set to "On", the Optical Picture Control (OPC) senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light.

•When set to "On(Display)", OPC effect displays on the screen while the OPC adjusts the screen brightness.

•When set to "On(Display)" or "On", the OPC indicator on the TV lights green.

Advanced Picture Setting

This TV provides various advanced functions for optimizing the picture quality.

C.M.S. (Color Management System)

Color tone is managed using the six-color adjustment setting.

C.M.S.-Hue:This is a standard to adjust the color either more reddish or more bluish in tone.

C.M.S.-Saturation:Increases or decreases the saturation of a selected color.

C.M.S.-Value:A higher value makes the image brighter. A lower value makes the image darker.

•For resetting all adjustment items to the factory preset values, press a/b to select "Reset", and then press

ENTER.

Color Temp. (Color Temperature)

For a better white balance, use color temperature correction.

High: White with bluish tone

Mid-High:

Middle:

Mid-Low:

Low: White with reddish tone

Active Contrast

Automatically adjusts the image contrast according to the scene.

On: Automatically adjusts the image contrast.

Off: No adjustment.

Film Mode (3:2 pull-down)

Automatically detects a fi lm-based source (originally encoded at 24 frames/second), analyzes it then recreates each still fi lm frame for high-defi nition picture quality.

On: Detects, analyzes, converts fi lm source.

Off: Normal viewing mode.

•"Film Mode" is not selectable when channel display shows an input resolution of 480p or 720p.

Digital Noise Reduction

Produces a clearer video image.

Off: No adjustment

High/Middle/Low: Select a desired level for viewing a clearer video image.

3D-Y/C

Provides high quality images with minimal dot crawl and cross color noise.

Slow: For still images.

Standard: Normal adjustment.

Fast: For moving images.

Off: For Game Mode.

•3D-Y/C is available for input signal from Composite Video and analog broadcasts (air and cable).

Monochrome

For viewing a video in monochrome.

On: For viewing in monochrome.

Off: Normal color.

Range of OPC

The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences.

The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of –16.

Max.: –15 through +16

Min.: –16 through +15

•The maximum setting cannot be set to a smaller number than the minimum setting.

•The minimum setting cannot be set to a bigger number than the maximum setting.

•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.

18