Sharp LC C4067U PC Audio Select, Parental CTRL Parental Control Setting, Secret No, Audio Setup

Page 21
PC Audio Select

On-Screen Display Menu

PC Audio Select

Determines whether the AUDIO terminal is used for INPUT 4 (PC-IN) or INPUT 6 (HDMI).

Input 4 (PC): Select this item when the audio signal is input via the INPUT 4 (PC-IN) terminal using an analog RGB cable.

Input 6 (HDMI): Select this item when the audio signal is input via the INPUT 6 (HDMI) terminal using an HDMI- DVI conversion cable.

•When "PC Audio Select" is set to "Input 6 (HDMI)", sound will not be produced if you use only an HDMI-certifi ed cable to connect HDMI-compatible equipment. To produce sound, you should make an analog audio connection.

•If you want to connect HDMI-compatible equipment using only an HDMI-certifi ed cable, set "PC Audio Select" to "Input 4 (PC)".

Parental CTRL

(Parental Control Setting)

Secret No.

Allows you to use a secret number to protect certain settings from being accidentally changed.

IMPORTANT:

Three conditions must be met to enable the V-Chip (see pages 22 and 23):

1.Secret No. is registered.

2.V-Chip/V-Chip (DTV Only) settings have been made.

•The “V-Chip (DTV Only)” will only be selectable when a new rating system can be downloaded via digital broadcasting in the U.S.

HDMI Auto View

To watch an HDMI or PC-IN equipment image, select "INPUT5", "INPUT6", "INPUT7" or "INPUT8" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the TV.

Enable: To use View Mode based on signal recognition, including an HDMI signal.

Disable: No function.

•Refer to your external equipment operation manual for the signal type.

•When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Audio Setup

You can output digital audio to an AV amplifi er or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected.

PCM: The optical output terminal outputs audio signal in PCM form. If your digital audio system does not support Dolby Digital, select "PCM".

Dolby Digital: The optical output terminal outputs audio signal in Dolby Digital form. It reproduces sound from surround program of digital.

Language

You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish.

3."Status" is set to "On".

■New Secret No.

You can set and change the secret number by using 0–9.

Input Secret No.: When you change the secret number, enter the old 4-digit secret number here. The cursor moves to "New Secret No.".

New Secret No.: When you set the new secret number, enter the new 4-digit secret number here. The cursor moves to "Reconfi rm".

Reconfirm: Enter the same 4-digit number you set in "New Secret No.".

■Secret No. Clear

You can clear your secret number.

Yes: Your secret number is cleared.

No: Your secret number is not cleared.

•As a precautionary measure, make a note of your secret number and keep it in a familiar place.

•If the secret number is cleared, the Status setting automatically sets to "Off". "V-Chip" and "Status" will not be selectable from the menu.

Status

Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not fi rst confi gure your secret number.

On: Enables Parental CTRL.

Off: Disables Parental CTRL.

Reset

If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values.

1"Return to factory pre-setting" displays on the screen.

•If you have already set the Secret No., input the 4-digit secret number here.

2Select "Yes".

•After the reset has been completed, the power shuts off and then comes back on. The screen will have returned to its original settings.

•The Channel Setup settings will not be changed.

•The Language settings will not be changed.

•The Secret number settings will not be changed.

•The TV Location settings will not be changed.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Make sure the following accessories are provided with the product Supplied AccessoriesLC-C4067U LIQUID CRYSTAL TELEVISIONIMPORTANT INFORMATION Model No Serial NoTINS-E192WJZZ For U.S.A. only Sharp at 1-800-BE-SHARPDECLARATION OF CONFORMITY INFORMATIONIMPORTANT SAFETY INSTRUCTIONS Additional Safety InformationDEAR SHARP CUSTOMER Precautions when transporting the TV TUNE INTO SAFETY THE ISSUETHIS MANUFACTURER CARES WALL MOUNTING IF YOU DECIDE TO WALL MOUNT YOUR FLATUsing an optional bracket to mount the TV Setting the TV on the WallAbout setting the TV angle QUICK REFERENCEUsing the Remote Control Unit QUICK INSTALLATION TIPS4 How to turn on the television for the fi rst time A Press POWER on the televisionNOTICE F-type connector should be finger-tightened only Installing Batteries in the Remote Control UnitConnecting Antenna Cable PreparationPart Names POWERTV Front TV Rear/SideConnecting a PC Connecting to External EquipmentInitial Setup Turning On/Off the PowerWatching TV ENTERYou can select 4 preset favorite channels in 4 different categories POWERChanging Volume Sleep TimerWhen the input source is TV, INPUT 1, 2 or 3 terminals Allows you to gain quick access to PC mode. Press PCWhen the input source is INPUT 4, 5, 6, 7 or 8 terminals You can enjoy Hi-Fi stereo sound or SAP broadcasts where available1 Press INPUT INPUT2 Press INPUT again or press a/b to select the input source 1 Press CCVIEW MODE Input signalYou can select the screen size 1 Press VIEW MODEUse the following buttons on the remote control to operate the menu Using the remote controlUsing the control panel of the main unit MENU MENU on the remote control INPUT ENTER on the remote controlAdvanced Picture Setting OPC SettingPicture Menu On-Screen Display MenuSetup Menu Power Control MenuNo Signal Off Power control setting allows you to save energyPC Setup CH SetupInput Signal for Analog PC Input Mode Only Auto Sync. for Analog PC Input Mode OnlyThree conditions must be met to enable the V-Chip see pages 22 and Parental CTRL Parental Control Setting2. V-Chip/V-Chip DTV Only settings have been made Audio SetupMPAA Voluntary movie rating system V-ChipTV Parental Guidelines Suggested age TV-Y All children TV-Y7 Directed to older childrenCanadian English Ratings How to temporarily release the V-CHIP BLOCKCanadian French Ratings Reactivating the temporarily released V-CHIP BLOCKSelect the CH display when changing channels for digital broadcasting Digital Caption SetupOption Menu Audio OnlySoftware Update Favorite CH Favorite Channel Setting3 Press a/b to select “Software Update”, and then press ENTER 4 Input the 4-digit secret number by using7 Press ENTER to start updating 6 During the data checking, “Checking” blinks9 After the screen shown below is displayed, press 10 Remove the USB memory deviceTroubleshooting-Digital Broadcasting TroubleshootingThe error message about reception of broadcast ProblemCommunication procedure Command formatCommand table RS-232C Port SpecificationsSpecifications Optional AccessoryModel LC-C4067U Part nameResolution PC Compatibility ChartCLEARING THE SECRET NUMBER The secret number isLIMITED WARRANTY Calling for ServiceCONSUMER LIMITED WARRANTY Warranty Period for this Product Additional Exclusions from15 3 / 4 Dimensional DrawingsUnit inch mm Unidad pulgada mm 4 37/64
Top Page Image Contents