Other useful features
Option |
| Option |
Auto input selection |
| Device check |
|
|
|
You can choose whether or not to switch the input source automatically when receiving an AQUOS LINK compatible signal on the TV during time shift operations.
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Time shift setting” > “Auto input selection”.
| Item | |
Enable | Release time shift when receiving an | |
AQUOS LINK compatible signal. Switch | ||
| input source automatically. | |
|
| |
| Time shift continues to work. The TV does | |
Disable | not switch input source automatically | |
even when receiving an AQUOS LINK | ||
| ||
| compatible signal. | |
|
|
You can manually check the condition of a USB storage device to be used for time shifting.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
>“Time shift setting” > “Device check” > select “Yes”.
NOTE
•This menu item cannot be selected when a USB storage device for time shift is not registered.
Option
Jump time setting
You can set the time interval for playback to resume after jumping backwards/forward.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
>“Time shift setting” > “Jump time setting”.
•A time interval from 1 to 99 minutes can be selected.
NOTE
•You can use the time interval you set using the cor d buttons on the control panel.
Option
Device registration
You need to perform this function to register the USB storage device for the time shift.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
>“Time shift setting” > “Device registration”.
•Refer to For time shift (Page 48) for registering a USB storage device.
NOTE
•Only one USB storage device can be registered for time shift. Remove all USB storage devices except the one used for time shift.
•At least 1 GB is required for a USB storage device for time shift.
•A USB HDD cannot be used as a USB storage device for time shift.
•Some USB storage devices, such as ones which have multiple drives, etc., cannot be used for time shift.
51