Preparation
Protection against overturning
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip- resistant measurement for your safety.
Anchoring the TV to the wall or a pillar
1Affix the TV to the wall or a pillar using extra strong ties and cup hooks.
View from the top
n o
Wall
Cup hook (commercially available) Tie (commercially available)
Fixing the TV to the table
1Place the TV on the table.
2Pull the attached restraining bracket out so that it is at a 90 degrees angle.
3 Insert commercially available screws in the holes of the restraining bracket and tighten the screws to secure the TV to the table.
• Use commercially available screws to firmly secure the TV.
CAUTION
• As this product is heavy, use a table that is wide enough to support the product and capable of withstanding the product’s weight. The table should be set where it will not be overturned.
• Be sure to use at least two people when moving the TV.
Restraining bracket (attached) Screws (commercially available)
6