Useful viewing functions
Option
Input label
You can label each input source with a custom description.
1Press # to select the desired input source from the “INPUT” menu, and then press A.
2Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”.
3Select each character of the new name for the input source with using the software keyboard (Page 13).
4Repeat the above until the name is fully spelt out, and then press @.
• The label can be six characters or less.
• When you want to set an input source name of less than six characters, select “Cancel”.
CH list
INPUT
TV
Switchable
INPUT2
NOTE
•You cannot change labels if the input source is “TV”, “USB media”, “Home network”, “YouTube” or “AQUOS.NET”.
Option
Headphone/Audio out select
You can select which device is used for outputting audio. Go to “HOME” > “TV Menu” > “Setup” > “Option”
>“Terminal setting” > “Headphone/Audio out select”.
| Item | |
Headphone | Output audio through headphones. | |
|
| |
Audio out | Output audio through an A/V receiver or | |
surround audio controller. | ||
|
Regarding the headphone jack
•Use headphones with a stereo mini plug (Ø 3.5 mm).
•Be sure to unplug headphones from the jack when they are not in use.
•The speakers do not output volume when headphones are plugged in.
•The “Audio” menu cannot be operated when headphones are plugged in.
•You can set the volume to different levels for each input source.
Volume display when headphones are plugged in
20
CAUTION
•This terminal is also used for headphones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing.
Selecting the HDMI picture size automatically
Option
HDMI auto view
This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI 1, 2, 3 and 4 terminals.
1Press #to select the input source (“HDMI1”,
“HDMI2”, “HDMI3” or “HDMI4”) connected to your HDMI device, and then press A.
2Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “HDMI auto view”.
| Item |
Enable/Disable | Set whether or not to use “Wide mode” |
based on signal recognition, including an | |
| HDMI signal. |
|
|
NOTE
•If you select “Audio out” when a cable is inserted in the AUDIO IN terminal, the TV speakers are muted.
•When you select “Audio out”, you can adjust the TV sound volume with the Yl/kbuttons on the TV or the remote control unit.
Option
Colour system
You can change the colour system to one that is compatible with the image on the screen.
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Colour system”.
NOTE
•The factory preset value is “Auto”.
•If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g., “PAL”, “SECAM”).
NOTE
•Refer to your external equipment operation manual for the above settings.
•When connecting a
40