Sharp LC-70LE735X operation manual Connecting a PC, Displaying a PC image on the screen

Connecting a PC

Connecting a PC

HDMI connection

PC HDMI 1, 2, 3 or 4 terminals

n

HDMI-certified cable

PC	HDMI 2 terminal*
	o
	p
 DVI/HDMI cable	 ø 3.5 mm stereo minijack
	cable

*When using the HDMI 2 terminal, you must select the proper item in the “Audio select” menu depending on the type of HDMI cable connected (refer to page 39 for details).

Analogue connection

PC	PC terminal*
	q
	r
 RGB cable	 ø 3.5 mm stereo minijack
	cable
PC	PC terminal*

s

t

DVI/RGB conversion cable  ø 3.5 mm stereo minijack cable

*When using the PC terminal, you must select “Video + Audio” in the “Audio select” menu (refer to page 39 for details).

NOTE

•The PC input terminals are DDC 2B-compatible.

•Refer to page 58 for a list of PC signals compatible with the TV.

Displaying a PC image on the screen

Selecting the picture size

You can select the picture size.

1Press WIDE.

•The “Wide mode” menu displays.

2Press WIDE or a/bto select the desired item.

EXAMPLE

Input signal
	1024g768		1360g768
Normal		Keeps the original aspect
		ratio in a full screen display.
		For viewing wide screen
Cinema		programmes. The top
		and bottom of the image
		is slightly cropped (only
		1024g768 signals).
Full		An image fully fills the
		screen.
		Detects the resolution of the
Dot by Dot		signal and displays an image
		with the same number of
		pixels on the screen.

NOTE

•You can also select an item from “Setup” > “Option” > “Option for view” > “Wide mode”.

•Connect the PC before making adjustments.

•Selectable picture size may vary with input signal type.

•Refer to page 38 for AV signals.

HDMI: 480i/480p/576i/576p/720p/1080i/1080p

ANALOGUE RGB: 576p/720p (50 Hz)/1080i

•The PC terminal is not compatible with 480i/576i/1080p signals.

57