Sharp LC-40LE830E, LC-46LE830RU Using the Menu screen, Basic operation, 1Display the Menu screen

Quick guide

Using the Menu screen

You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments.

LCFONT	This product is embedded with LC Font technology, which was developed
	by SHARP Corporation for clearly displaying easy-to-read characters on LCD
	screens.

Basic operation

1Display the Menu screen

Press @and the “Menu” screen displays.

2Select an item

The “Menu” is classified by setting categories for improving TV viewing.

See the right column for details on the operations in the “Menu” screen.

3Exit the Menu screen

The operation will exit the “Menu” screen if you press >before it is completed.

NOTE

• “Menu” options differ in the selected input modes, but the operating procedures are the

Tips:

Selecting in the Menu

Press c/dto select the desired menu, and then press ;. Press 6to return to the previous menu category.

Press c/dto select the desired sub- menu, and then press ;.

Press a/bto select the item you want to select/adjust, and then press ;.

Menu

CH list	Setup
:Enter	:Back

Picture

AV mode

OPC

[Off]

Backlight

3D brightness boost

[Middle]

Regarding the instructions in the manual

Selecting options

Press a/bor c/d to configure the control for improving TV viewing, and then press ;.

EXAMPLE

Backlight

Yes No

NOTE

•Refer to the guide display below the menu bar to see when to press the ;button.

same.

• Items with 4cannot be selected for various reasons.

• Some items cannot be selected depending on signal types, optional settings or

connected devices.

In this manual, the following expression is often used in order to simplify instructions.

• Go to “Menu” > “Setup” > ...

This indicates how to navigate through the menu screen using the a/b/ c/dand ;buttons.

About the guide display

The guide display below the menu bar shows operations for the OSD.

•The bar above is an operational guide for the remote control unit. The bar will change in accordance with each menu setting screen.

CH list		Setup
:Select	:Enter	:Back

12