Watching TV
Daily operation
Switching on/off
Turning on/off the power
1Turn on (;)/off (a) the MAIN POWER switch on the rear of the TV (Page 7).
2To turn on/off the TV, press <aon the TV or >aon the remote control unit.
NOTE
•When turning off the power using the MAIN POWER switch on the rear of the TV, EPG data will be lost.
Standby mode
ETo standby mode
If the MAIN POWER switch on the rear of the TV is turn on (;), you can switch it to standby by pressing <aon the TV or >aon the remote control unit.
ESwitching on from standby
From standby, press <aon the TV or >a on the remote control unit.
NOTE
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet or turn off (a) the MAIN POWER switch on the rear of the TV (Page 7).
•A small amount of electric power is still consumed even when the MAIN POWER switch is turned off (a) (Page 7).
Switching between digital, satellite* and analogue broadcasts
Watching digital | Watching analogue |
broadcasts | broadcasts |
Watching satellite broadcasts
*Important information:
Satellite services are only available for the 830 model series.
NOTE
•If multiple satellite services are set, each time you press the SAT button the channel switches as follows.
SAT1 
SAT2
SAT4 
SAT3
Changing channels
With :r/s | With 0_9 | |
|
|
|
|
|
|
Selecting an external video source
Once the connection is made, press bto display the “INPUT” screen, and then press bor a/bto switch over to the appropriate external source with ;.
CH list
INPUT
TV
Switchable
NOTE
•You can also select an external video source from “CH list” > “INPUT”.
•Only HDMI inputs which are not set for “Input skip” (Page 43) and properly connected inputs can be selected.
19