Sharp LC-46LE831E Searching for satellite broadcasts, Series only, 1When you change the antenna

Initial auto installation
Searching for satellite broadcasts			1When you change the antenna	3 Press a/b/c/dto select your favorite
(830 series only)			connection setting:	satellite, and then press ;.
			Press c/dto select “Change setting”, and then	• You cannot select “Next” unless you set the satellite
				broadcast in step 3.
Press c/dto select “Yes”, and then press ;.			press ;.
			• The antenna connection setting screen is displayed.
Yes	No			Atlantic Bird 1
			Single satellite
				Euro Bird 1
			2 satellites on 22kHz switchbox
• If you do not perform “Satellite search” setting,			2 satellites on toneburst switchbox
select “No”, and then press ;.
				4 Press a/bto select “Next”, and then press
• The current DVB-S/S2 setting screen is displayed.			Max. 4 satellites on DiSEqC multiswitch
Satellite System			Communal satellite system	;.
Max. 4 satellites on DiSEqC multiswitch
	LNB Frequency		NOTE	SAT1 [ASTRA 1]
Satellite	Low	High
			• You can select the antenna connection method from the	Next
			five types. Consult your dealers before using a method
			other than “Single satellite”.
other			E “Single satellite” setting	5 Press c/dto select “Yes (0/22kHz)” or “No” to
Next	Change setting		1 Press a/bto select “Single satellite”, and then	set the LNB frequency, and then press ;.
			press ;.
			2 Press a/bto select “SAT1 [None]” to display	Yes (0/22kHz)	No
			the satellite broadcasts that the TV can receive,
• You must first complete “Change setting” before			and then press ;.	6 Press a/bto select the item and press c/d
moving to the “Next” setting.
			SAT1 [None]	to adjust 9,000 MHz to 12,000 MHz to the
				appropriate value.
			Next	EXAMPLE
				SAT1 low
				SAT1 high
				OK

16