Useful viewing functions
Input source settings
Option
Input select
For setting the signal type of external equipment.
1Press bto select the input source for setting the input signal (“EXT1”) from the “INPUT” menu, and then press ;.
2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”.
| Item |
EXT1 | Y/C, CVBS, RGB |
NOTE
•If no (colour) image displays, try changing to another signal type.
•Check the operation manual of the external equipment for the signal type.
Option
Input label
You can label each input source with a custom description.
1Press bto select the desired input source from the “INPUT” menu, and then press ;.
2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”.
3Select each character of the new name for the input source with using the software keyboard (Page 13).
NOTE
•The label can be six characters or less.
•You cannot change labels if the input source is “TV”, “USB media”, “Home network” or “NET”.
CH list
INPUT
TV
Switchable
Selecting the HDMI picture size automatically
Option
HDMI auto view
This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI 1, 2, 3 and 4 terminals.
1Press bto select the input source (“HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4”) connected to your HDMI device, and then press ;.
2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “HDMI auto view”.
Option
Headphone/Audio out select
You can select which device is used for outputting audio.
Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone/Audio out select”.
| Item | |
Headphone | Output audio through headphones. | |
Audio out | Output audio through an A/V receiver | |
or surround audio controller. | ||
|
CAUTION
•This terminal is also used for headphones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing.
NOTE
•If you select “Audio out” when a cable is inserted in the HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are muted.
•When you select “Audio out”, you can adjust the TV sound volume with the Yl/kbuttons on the TV or
Option
Colour system
You can change the colour system to one that is compatible with the image on the screen.
Go to “Menu” > “Setup” > “Option” > “Colour system”.
NOTE
•The factory preset value is “Auto”.
•If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g., “PAL”, “SECAM”).
44