Sharp LC-46LE830E Connecting a PC, Displaying a PC image on the TV Selecting the picture size

Connecting a PC

Connecting a PC

HDMI connection

PC HDMI 1, 2, 3 or 4 terminal

HDMI-certified cable (commercially available)

PC HDMI 2 terminal*

Analogue connection

PC PC terminal*

 RGB cable	 ø 3.5 mm stereo
(commercially	minijack cable
available)	(commercially
	available)
PC	PC terminal*

Displaying a PC image on the TV

Selecting the picture size

You can select the picture size.

1Press f.

• The “Wide mode” menu displays.

2Press for a/bto select the desired item.

EXAMPLE

 ø 3.5 mm stereo	 DVI/HDMI cable
minijack cable	(commercially
(commercially	available)
available)

*When using the HDMI 2 terminal, you must select the proper item in the “Audio select” menu depending on the type of HDMI cable connected (refer to page 43 for details).

DVI/RGB conversion  ø 3.5 mm stereo

cable	minijack cable
(commercially	(commercially
available)	available)

*When using the PC terminal, you must select “Video+Audio” in the “Audio select” menu (refer to page 43 for details).

NOTE

•The PC input terminals are DDC 2B-compatible.

•Refer to page 57 for a list of PC signals compatible with the TV.

	Normal		Full
		Item
Normal		Keeps the original aspect ratio in a full
		screen display.
Cinema		For letterbox pictures. Bars may
		appear on the top and bottom with
		some programmes.
Full		An image fully fills the screen.
Dot by Dot		Displays an image with the same
		number of pixels on the screen.

NOTE

•You can also select an item from the “Wide mode” menu (Page 42).

•Connect the PC before making adjustments.

•Selectable picture size may vary with input signal type.

•You may not be able to change the wide mode while in 3D mode.

•Refer to page 42 for AV signals.

HDMI: 480i/480p/576i/576p/720p/1080i/1080p

ANALOGUE RGB: 576p/720p (50 Hz)/1080i

•The PC terminal is not compatible with 480i/576i/1080p signals.

55