Sharp LC-40LE700S, LC-40LE700E Analogue broadcast setting, Searching for cable broadcasts

Quick guide

ESearching for cable broadcasts

To change each item to the appropriate settings:

1Press a/bto select the menu, and then press ;.

Scrambled stations	[Yes]
Search method	[Channel]
Start frequency
Network ID	[None]
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start

2Press a/b/c/dor 0_9 to select or input

the appropriate item/value, and then press

;.

3Press a/bto select “Search start”, and then press ;.

4The TV searches for, sorts and stores all the receivable TV stations according to their

settings and the connected antenna.

• To abort the initial auto installation in progress, press 6.

H

•The “Scrambled stations” menu and the “Search method” menu are not displayed on the screen as each menu item is fixed.

•The value of “Start frequency” and “Network ID” should be set to the value specified by the cable provider.

Menu	Description	Selectable items
Scrambled	Specifies if you
	need to add pay-TV	Yes, No
stations
	services.
		Channel: Extracts all
		of information from a
		channel (quick, but
Search	Specifies how you	needs corresponding
method	search channels.	TV stations).
		Frequency: Checks
		every frequency in
		range (slow).
Start		From 47.0_858.0
frequency		MHz
	Specifies the network.
	Set this to register
Network ID	only the specified	None, 0_65535
	network ID without
	registering any special
	services.
	The symbol rates
Symbol	are specified by the
	cable provider. Input	1000_9000
rate 1*
	the value received for
	CATV.
	The symbol rates
Symbol	are specified by the
	cable provider. Input	1000_9000
rate 2*
	the value received for
	CATV.
QAM		16, 32, 64, 128, 256
modulation 1
QAM		None, 16, 32, 64,
modulation 2		128, 256

*Set up “Symbol rate 2” if the cable provider uses several symbol rates.

H

•When you set “Sweden” in the country setting and select “Cable” for the searching format, you can select the cable provider “ComHem”. Follow the screen prompts.

Analogue broadcast setting

The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna.

• To abort the initial auto installation in progress, press 6.

10