Sharp LC-32LE700S, LC-40LE700S, LC-40LE700E Connecting a PC, Displaying a PC image on the screen

Connecting a PC

Connecting a PC

HDMI connection

PC HDMI 1, 2, 3 or 4

￿

HDMI-certified cable

PC	HDMI 2*
￿
	￿
 DVI/HDMI cable	 ø 3.5 mm stereo
	minijack cable

*When using the HDMI 2 terminal, you must select the proper item in the “PC audio select” menu depending on the type of HDMI cable connected (refer to page 25 for details).

Analogue connection

PC	EXT 4*
￿
￿
 RGB cable	 ø 3.5 mm stereo
	minijack cable
PC	EXT 4*
￿
￿
 DVI/RGB conversion	 ø 3.5 mm stereo
cable	minijack cable

*When using the EXT 4 terminal, you must select “EXT 4 (RGB)” in the “PC audio select” menu (refer to page 25 for details).

NOTE

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 38 for a list of PC signals compatible with the TV.

Displaying a PC image on the screen

Selecting the picture size

You can select the picture size.

1Press f.

• The “WIDE MODE” menu displays.

2Press f or a/bto select a desired item.

EXAMPLE

Normal	Full
	Item
Full	An image fully fills the screen.
	For letterbox pictures. Bars may appear
Cinema	on the top and bottom with some
	programmes.
Normal	Keeps the original aspect ratio in a full
	screen display.
Dot by Dot	Displays an image with the same
	number of pixels on the screen.

NOTE

•Connect the PC before making adjustments.

•Selectable picture size may vary with input signal type.

•Refer to page 31 for AV signals.

HDMI: 480i/480p/576i/576p/720p/1080i/1080p

ANALOGUE RGB: 576p/720p (50 Hz)/1080i

•The ANALOGUE RGB (PC) terminal (EXT 4) is not compatible with 480i/576i/1080p signals.

37