AQUOS LINK
Connecting an AQUOS BD player/AQUOS recorder via |
| Connecting an AQUOS BD |
the AQUOS AUDIO speaker system |
| player/AQUOS recorder |
|
| only |
AQUOS BD player/AQUOS | AQUOS AUDIO speaker system | AQUOS BD player/AQUOS recorder | ||
| ||||
recorder |
|
|
|
|
| Optical audio cable |
| ||
|
|
|
|
|
AQUOS LINK setup |
|
|
|
|
|
|
|
| |
Basic operation |
|
|
| |
|
| Selecting channel key | ||
|
|
|
|
|
Go to “MENU” > “Option” > “AQUOS LINK setup” > select the menu you want to set.
AQUOS LINK control
Set to “On” to enable HDMI CEC functions.
Auto power on
If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.
NOTE
• The factory default for this item is “Off”.
Selecting recorder
Here, you can select a recorder for the recording from several connected recorders.
NOTE
•If you have connected the AQUOS AUDIO speaker system between the TV and an AQUOS recorder, the external source’s indication changes (e.g., from “HDMI 1” to “HDMI 1 (Sub)”).
This function allows you to select the channel of the connected HDMI device using the TV’s remote control unit.
1Press a/bto select the input source of the connected HDMI device you want to control
using the TV’s remote control unit, and then press ;.
2Press c/dto select “On”, and then press
;.
Using genre info
This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast.
20