Sharp LC-40LE700E, LC-40LE700S Connecting external devices, Scart connection,  Scart cable

Connecting external devices

SCART connection

Example of connectable devices	Example of connectable devices
E Decoder	E VCR
	E DVD player/recorder

￿

Decoder

SCART cable

NOTE

If your VCR supports TV-VCR advanced AV Link systems, you can connect the VCR using a fully wired SCART cable.

￿

￿

VCRDecoder

SCART cable

•In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input terminal to which the decoder is connected in “Manual adjust” in the “Analogue setting” menu (Page 29).

•TV-VCR advanced AV Link systems may not be compatible with some external sources.

•You cannot connect the VCR with decoder using a fully wired SCART cable when selecting “Y/C” under “EXT 2” in the “Input select” menu.

Controlling devices with SCART using AV Link

This TV incorporates four typical AV Link functions for smooth connections between the TV and other audiovisual equipment.

One touch play	While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual
	source (e.g., VCR, DVD player/recorder).
TV standby	When the TV enters standby mode, the connected audiovisual equipment (e.g., VCR, DVD player/
	recorder) enters standby mode as well.
WYSIWYR	When the remote control unit of the connected VCR has the WYSIWYR button, you can automatically
	start recording by pressing the WYSIWYR button.
Preset download	Automatically transfers the channel preset information from the tuner on the TV to the one on the
	connected audiovisual equipment (e.g., VCR) via the EXT 2 terminal.

NOTE

•Refer to the operation manuals of external equipment for details.

•The AV Link function works only when audiovisual equipment is connected to the EXT 2 terminal with a fully wired SCART cable.

•The use of the AV Link function is only possible if the TV has enforced a complete auto installation with the connected audiovisual equipment (refer to Initial auto installation on page 9).

The availability of the AV Link function depends on the audiovisual equipment used. Depending on the manufacturer and type of equipment used, it is possible that the described functions may be completely or partially unusable.

•When the TV receives a scrambled DTV signal, the WYSIWYR function may not work.

•If the TV’s received signal is switched to a scrambled signal during recording with the WYSIWYR function, black images will be recorded in the external device.

17