Basic adjustment
Channel settings
Auto installation
Setup
Auto installation
The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital and analogue individually and reconfigure the settings after the initial auto installation has been completed.
1Press c/dto select “Yes”, and then press
;.
2Press a/b/c/dto select the desired language, and then press ;.
NOTE
•PIN input is required when executing “Auto installation”. The default PIN is “1234”. To change the PIN setting, refer to Password/Parental lock settings (Page 30). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 41).
•You cannot set the Home/Store setting and the country setting in “Auto installation” in the “Setup” menu. If you want to reconfigure those settings, automatically execute initial auto installation after executing “Reset” from the “Setup” menu.
•The current country setting is displayed on the screen.
3Press a/bto select the broadcast standard you want to search, and then press ;.
Programme setup
Setup
Programme setup
You can reconfigure the DTV service settings automatically or manually.
Press a/bto select the broadcast standard you want to reconfigure, and then press ;.
NOTE
•PIN input is required when executing “Programme setup”. The default PIN is “1234”. To change the PIN setting, refer to Password/Parental lock settings (Page 30). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 41).
Digital setting
EAdditional search
Use this menu to add new services automatically after “Digital search” in the “Auto installation” menu has been completed.
EManual search
Add new services within a specified frequency band.
•Enter the frequency using 0_9 numeric buttons.
•You can perform “Manual search” with a service number only when the five Nordic countries have been selected in the country setting.
EDigital search
After selecting the service you want to search, either “Terrestrial” or “Cable”, refer to Digital broadcast setting on pages 9_10.
•The “Digital search” has a “Reset” function. This function allows you to reset all setting values.
EAnalogue search
The TV searches for, sorts and stores all the receivable TV stations. Refer to Analogue broadcast setting on page 10.
27