Sharp LC-42SD1E, LC-37SD1E operation manual Power Control menu, Setup menu, Auto Search

Page 17
Press MENU and the MENU screen displays. Press c/dto select “Setup”.
• See page 17 for setting PIN.
4 Press c/dto select “Yes”, and then press OK.
5 You can set language and country the same as in the initial auto installation. Follow steps 1 and 2 on page 8.
Press MENU and the MENU screen displays. Press c/dto select “Setup”.
Press a/bto select “Auto Installation”, and then press OK.
If you have already set the PIN under “Child Lock”, enter it here.
1
2
3
You can run Auto Installation again, even after setting up the preset channels.

Menu operations

Power Control menu

MENU [Power Control]

Audio

Power Control

No Signal Off

[Disable]

No Operation Off

[Disable]

 

 

No Signal Off

TV/AV only

 

 

Menu Operation: A (page 12)

When set to “Enable” the TV will automatically enter the standby mode if there is no signal input for 15 minutes.

Five minutes before the TV enters standby mode, the remaining time displays every minute.

NOTE

When a TV programme finishes, this function may not operate.

This function is not available in DTV mode.

No Operation Off

TV/DTV/AV only

 

 

Menu Operation: A (page 12)

When set to “Enable” the TV will automatically enter the standby mode if no operations are performed for 3 hours.

Five minutes before the TV enters standby mode, the remaining time displays every minute.

Power Management

PC only

 

 

Menu Operation: A (page 12)

When set, the TV will automatically enter the standby mode.

Item

Off: • No power management

• Factory preset value.

Mode1: • If there is no signal input for 8 minutes, the TV enters the standby mode.

Even if you start using the PC and the signal inputs again, the TV stays in standby mode.

The TV turns on again by pressing a on the

TV or Bon the remote control unit. (See page 8.)

Mode2: • If there is no signal input for 8 seconds, the TV enters the standby mode.

When you start using the PC and the signal inputs again, the TV turns on.

The TV turns on again by pressing aon the TV or Bon the remote control unit. (See page 8.)

Setup menu

MENU [Setup]

Setup

Option

Auto Installation

 

Programme Setup

 

Child Lock

 

Position

 

WSS

[On]

4:3 Mode

[Panorama]

Language

[English]

Supply Voltage

[Off (0V)]

 

 

Auto Installation

TV only

 

 

Programme Setup

TV only

 

 

This section describes how to set up analogue TV channels manually.

1

2

3 Press a/b to select “Programme Setup”, and then press OK.

If you have already set the PIN under “Child Lock”, enter it here.

• See page 17 for setting PIN.

4 Press a/b to select “Auto Search”, “Manual Adjust”, “Sort” or “Erase Programme”, and then press OK.

Auto Search

 

Manual Adjust

 

Sort

 

Erase Programme

 

No

Yes

Auto Search

You can automatically search for and download TV channels by performing the procedure below. This is the same function as from programme auto search to preset download in Auto Installation.

1 Repeat steps 1 to 4 in Programme Setup.

2 Press c/dto select “Yes”, and then press OK.

1Programme auto search

2Auto labelling

3Auto sorting

4Preset download

15

Image 17
Contents LC-37SD1E LC-42SD1E Blue Neutral Brown Live Special Note for Users in the U.KContents Precautions when transporting the TV Important Safety PrecautionsDear Sharp customer TrademarksQuick guide Supplied accessoriesAttaching the stand Short screws m4 Long screws m4Setting the TV on the wall Setting the TVAntenna Ferrite CoreInserting the batteries Using the remote control unitUsing 2 on the remote control unit Remote control unitDTV mode Analogue TV modeTV Rear view TV Front viewStandby mode Turning on the powerInitial auto installation Analogue Using the analogue programme listConnecting a VCR Using external equipmentConnecting a DVD player Connecting a game console or camcorderUsing AV Link function Connecting a decoderConnecting a PC Menu operation buttons Menu operationsOn-Screen Display ExampleMenu operations Common operationsMenu Operation a Menu Operation BAV Mode Picture adjustmentsPicture menu AdvancedAudio menu Audio adjustmentsSurround Clear VoiceAuto Search Power Control menuSetup menu Erase Programme Menu operations Manual AdjustSort Input Label Resetting the PINChanging the PIN Enter the same 4-digit number as in to confirmOption menu WSS Wide Screen Signalling TV/DTV/AV onlyLanguage Supply VoltageInput source Signal type For setting the signal type of external equipmentDNR Digital Noise Reduction TV/DTV/AV only Input SelectMode menu Useful featuresManual Selection Auto SelectionTeletext function Still imageDTV common operations DTV menu operationsDTV menu operation buttons DTV On-Screen Display About using the character set screen Programme SetupLanguage DTV menu operationsMove To DTV menu operations FavouriteSkip MoveCarrier Scan InstallationAuto Installation Carrier Setup System SetupOSD Setup Configure On-Screen Display and Child Lock settingsAccessories Press OK to access the CI menu Supplying power to the antennaCommon Interface Inserting a CA cardUsing the EPG Useful features DTVUsing the EPG Timer About EPGUsing the digital programme list Using the ESG Viewing a service bannerUseful features DTV Service bannerUsing the MHEG5 application UK only Using the multi audio functionDisplaying subtitles Sample MHEG5 screenAppendix TroubleshootingProblem Possible Solution RS-232C port specifications PC compatibility chartAppendix PC Control of the TVRating table for Child Lock CommandsUniversal Parental Rated UniversalPart name Part number SpecificationsOptional accessories Information on Disposal for Business Users European Union Other Countries outside the EULC-42SD1E LC-37SD1E / LC-42SD1ETINS-C712WJZZ

LC-37SD1E, LC-42SD1E specifications

The Sharp LC-42SD1E and LC-37SD1E are part of Sharp's LCD television lineup that gained popularity for their impressive picture quality and innovative technologies. Designed to meet the demands of home entertainment, these models are distinguished by their advanced features and user-friendly interfaces.

The LC-42SD1E boasts a 42-inch screen, while the LC-37SD1E offers a slightly smaller 37-inch display, making both options suitable for various room sizes. One of the standout features of these televisions is their Sharp's proprietary Aquos technology, which enhances color reproduction and clarity. This technology ensures vivid and vibrant images, providing viewers with a captivating viewing experience perfect for movies, sports, and gaming.

Both models sport a native resolution of 1366x768 pixels, delivering outstanding HD picture quality. The displays utilize a high brightness level, resulting in sharp, easily visible images, even in well-lit environments. Additionally, the high dynamic contrast ratio contributes to deeper blacks and brighter whites, enhancing the overall visual experience.

Connectivity options are plentiful on the LC-42SD1E and LC-37SD1E. They come equipped with multiple HDMI ports, allowing seamless integration with modern devices such as Blu-ray players, gaming consoles, and streaming devices. Furthermore, these models include USB ports and component input for additional connectivity possibilities, making it easy to enjoy content from various sources.

An integral part of the viewing experience is sound quality. Both models feature Sharp's audio technology, which produces clear and balanced sound, complementing the stunning visuals. Enhanced audio settings allow users to tailor the sound experience based on their preferences.

Energy efficiency is another consideration with these televisions. Both the LC-42SD1E and LC-37SD1E are Energy Star certified, promoting responsible energy use without compromising performance. This makes them a great choice for environmentally conscious consumers.

In conclusion, the Sharp LC-42SD1E and LC-37SD1E televisions exemplify a balance of technology, performance, and energy efficiency. With their impressive display quality, robust connectivity options, and user-friendly features, they are ideal choices for anyone looking to enhance their home entertainment experience.