Sharp LC-37SD1E, LC-42SD1E Turning on the power, Standby mode, Initial auto installation Analogue

Page 10
Press c/dto select “Installation”.

Quick guide

Turning on the power

Press a on the TV or B on the remote control unit.

Standby mode

Press B on the remote control unit when the TV is on.

•The TV enters standby mode and the image on the screen disappears.

•The B indicator on the TV changes from green to red.

•To completely turn off the power to the TV, unplug the AC cable from the AC outlet. However, do not unplug the AC cable unless otherwise instructed.

Display status indicator

Off

Power off

 

 

Red

The TV is in standby mode.

 

 

Green

The TV is on.

 

 

NOTE

•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet.

•Weak electric power is still consumed even when a is turned off.

•In DTV input mode, if the power is turned off immediately after a setting change from the menu screen, the new setting or channel information may not be memorised.

Initial auto installation (Analogue)

When the TV powers on for the first time after purchase, the initial auto installation (Analogue) is invoked. You can automatically set language, country and channels in successive operations.

NOTE

•The initial auto installation functions only once. If the initial auto installation is not completed, (ex: When menu screen disappeared by not operating for a few minutes, when the power shut down, etc.), try Auto Installation from the Setup menu. (See page 15.)

•The initial auto installation stops by pressing RETURN.

1 Setting the on-screen display language

1Press a/b/c/d to select the desired language listed on the screen.

2Press OK to enter the setting.

2 Setting the country or area

1Press a/b/c/d to select your country or area listed on the screen.

2Press OK to enter the setting.

• The programme auto search starts at the same time.

After this setting, auto search starts with the following order.

1Programme auto search

2Auto labelling

3Auto sorting

4Preset download

You do not need to do anything during the auto search.

The setup menu disappears and you can watch the programme on channel 1.

Using the analogue programme list

You can also select the desired channel from programme list instead of using 0-9numeric buttons or P (r/s).

1 Press OK when no other menu screen is displayed. (Except external input.)

2 Press a/bto select the desired channel to tune in, and then press OK.

3 Press END to exit the Programme List.

Initial auto installation (DTV)

Digital Video Broadcasting is a transmission scheme. It is much more than a simple replacement for existing analogue television transmission. DVB provides more stations, clearer picture quality and other services displayed on the screen. It also allows a range of new features and services including subtitles and multiple audio tracks.

To watch DTV broadcasts, follow the procedures below to scan all available services in your area.

1 Press DTV or b to access the DTV mode.

2 Press DTV MENU and the DTV Menu screen displays.

3

4 Press a/bto select “Auto Installation”, and then press OK.

If you have already set the PIN, enter it here. If not, enter the factory preset PIN “1234”.

•See page 17 for setting PIN.

•A confirmation message displays. Press c/d to select “Yes”, and then press OK to start the search.

5 The TV starts scanning all available DTV and radio services in your area.

NOTE

•The language and country settings used in this operation are the settings you have already set while executing the Initial auto installation (Analogue). If you want to reconfigure the country setting, for instance after moving to another country, conduct “Auto Installation” from the Analogue Menu again.

•The services are stored according to the channel number information embedded in the stream (if available). If the information is not available, the services are stored according to the order in which they were received.

If you would like to sort the order, it is possible to arrange it as explained in page 24.

•To cancel the scan in progress, press END.

•You cannot select any DTV-related menu items unless “Auto Installation” has been completed.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents LC-37SD1E LC-42SD1E Special Note for Users in the U.K Blue Neutral Brown LiveContents Dear Sharp customer Important Safety PrecautionsPrecautions when transporting the TV TrademarksAttaching the stand Supplied accessoriesQuick guide Short screws m4 Long screws m4Antenna Setting the TVSetting the TV on the wall Ferrite CoreUsing the remote control unit Inserting the batteriesDTV mode Remote control unitUsing 2 on the remote control unit Analogue TV modeTV Front view TV Rear viewInitial auto installation Analogue Turning on the powerStandby mode Using the analogue programme listConnecting a DVD player Using external equipmentConnecting a VCR Connecting a game console or camcorderConnecting a PC Connecting a decoderUsing AV Link function On-Screen Display Menu operationsMenu operation buttons ExampleMenu Operation a Common operationsMenu operations Menu Operation BPicture menu Picture adjustmentsAV Mode AdvancedSurround Audio adjustmentsAudio menu Clear VoiceSetup menu Power Control menuAuto Search Sort Menu operations Manual AdjustErase Programme Changing the PIN Resetting the PINInput Label Enter the same 4-digit number as in to confirmLanguage WSS Wide Screen Signalling TV/DTV/AV onlyOption menu Supply VoltageDNR Digital Noise Reduction TV/DTV/AV only For setting the signal type of external equipmentInput source Signal type Input SelectManual Selection Useful featuresMode menu Auto SelectionStill image Teletext functionDTV menu operation buttons DTV On-Screen Display DTV menu operationsDTV common operations Language Programme SetupAbout using the character set screen DTV menu operationsSkip DTV menu operations FavouriteMove To MoveAuto Installation InstallationCarrier Scan OSD Setup System SetupCarrier Setup Configure On-Screen Display and Child Lock settingsAccessories Common Interface Supplying power to the antennaPress OK to access the CI menu Inserting a CA cardUsing the EPG Timer Useful features DTVUsing the EPG About EPGUseful features DTV Using the ESG Viewing a service bannerUsing the digital programme list Service bannerDisplaying subtitles Using the multi audio functionUsing the MHEG5 application UK only Sample MHEG5 screenProblem Possible Solution TroubleshootingAppendix Appendix PC compatibility chartRS-232C port specifications PC Control of the TVUniversal Parental Rated CommandsRating table for Child Lock UniversalOptional accessories SpecificationsPart name Part number Other Countries outside the EU Information on Disposal for Business Users European UnionLC-37SD1E / LC-42SD1E LC-42SD1ETINS-C712WJZZ

LC-37SD1E, LC-42SD1E specifications

The Sharp LC-42SD1E and LC-37SD1E are part of Sharp's LCD television lineup that gained popularity for their impressive picture quality and innovative technologies. Designed to meet the demands of home entertainment, these models are distinguished by their advanced features and user-friendly interfaces.

The LC-42SD1E boasts a 42-inch screen, while the LC-37SD1E offers a slightly smaller 37-inch display, making both options suitable for various room sizes. One of the standout features of these televisions is their Sharp's proprietary Aquos technology, which enhances color reproduction and clarity. This technology ensures vivid and vibrant images, providing viewers with a captivating viewing experience perfect for movies, sports, and gaming.

Both models sport a native resolution of 1366x768 pixels, delivering outstanding HD picture quality. The displays utilize a high brightness level, resulting in sharp, easily visible images, even in well-lit environments. Additionally, the high dynamic contrast ratio contributes to deeper blacks and brighter whites, enhancing the overall visual experience.

Connectivity options are plentiful on the LC-42SD1E and LC-37SD1E. They come equipped with multiple HDMI ports, allowing seamless integration with modern devices such as Blu-ray players, gaming consoles, and streaming devices. Furthermore, these models include USB ports and component input for additional connectivity possibilities, making it easy to enjoy content from various sources.

An integral part of the viewing experience is sound quality. Both models feature Sharp's audio technology, which produces clear and balanced sound, complementing the stunning visuals. Enhanced audio settings allow users to tailor the sound experience based on their preferences.

Energy efficiency is another consideration with these televisions. Both the LC-42SD1E and LC-37SD1E are Energy Star certified, promoting responsible energy use without compromising performance. This makes them a great choice for environmentally conscious consumers.

In conclusion, the Sharp LC-42SD1E and LC-37SD1E televisions exemplify a balance of technology, performance, and energy efficiency. With their impressive display quality, robust connectivity options, and user-friendly features, they are ideal choices for anyone looking to enhance their home entertainment experience.
Top Page Image Contents