Sharp LC-37SD1E DTV menu operations Favourite, Move To, Skip, Press OK to register the change

• Pressing will turn the lock icon on and off. (PIN entry is required when lifting the lock icon.)

• Do not press END to exit the screen here if you wish to register the change.

Press OK.

3 Press a/bto register the selected service to any of the 4 favourite groups (None, Fav 1 ... Fav 4) and then press OK. An icon displays indicating the favourite status.

• Do not press END to exit the screen here if you wish to register the change.

4 Press OK.

5 Now you can easily select your favourite service from the Programme List. (See page 30.)

NOTE

• You cannot register the same service to two different favourite groups.

Lock

When the service is locked, you must enter your PIN whenever you tune to the service.

1 Press a/bto select the desired service.

2 Press on the remote control.

If you have already set the PIN, enter it here. If not, enter the factory preset PIN “1234”.

An icon displays indicating the service is locked.

DTV menu operations

Favourite

Assign services to 4 different favourite groups.

1 Press a/bto select the desired service.

2 Press on the remote control. A selection box displays.

Move To

Use this function to change the position of two selected services.

1 Press a/bto select the desired service.

2 Press on the remote control.

3 Enter the number you want to change to using - numeric buttons, and then press OK. The positions of the selected services are switched.

•Do not press END to exit the screen here if you wish to register the change.

•You cannot enter a service number that is not listed.

4 Press OK again, the message “Successfully updated” displays. The change is now registered.

001	ZDF			001	RTL
003002	SAT.ARD	1	s	003002	SAT.ARD	1
004	RTL			004	ZDF

Skip

3

NOTE

• See page 17 for setting the PIN.

Services that are set to skip will not be picked up when pressing P (s/r).

1 Press a/bto select the desired service.

2 Press on the remote control. An icon displays indicating the service to be skipped.

•Pressing will turn the skip icon on and off.

•Do not press END to exit the screen here if you wish to register the change.

3 Press OK.

NOTE

•To view services that are set to be skipped, use - numeric buttons or select from the Programme List.

Move

Sort the order of the selected service by moving the service position.

1 Press a/bto select the desired service.

2 Press on the remote control. An icon displays indicating the service to be moved.

• Pressing will turn the move icon on and off.

3 Move the selected service to the desired position using a/b, and then press OK.

•Do not press END to exit the screen here if you wish to register the change.

4 Press OK to register the change.

EXAMPLE:

Moving “002 ZDF” ahead of “001 ARD”.

Default order: Press a/bto select the desired service in 001rs002rs003rs004.

Sorted order: Press a/bto select the desired service in 002rs001rs003rs004.

	001	ARD		002	ZDF
	002	ZDF	s	001	ARD
	003	SAT. 1		003	SAT. 1
24	004	RTL		004	RTL