Sharp LC-42SD1E, LC-37SD1E operation manual Auto Installation, Carrier Scan

Page 27
Press c/dto select “Installation”.

DTV menu operations

Select

Use this function to jump to the specific service in one step. This is useful when there are many services displayed on screen to scroll through.

1 Press on the remote control. Now you can change the service number on the left side of the screen.

2 Enter the number using - numeric buttons, and then press OK. The highlight moves to the selected service.

Erase

Erase the selected service(s) from the memory.

1 Press a/bto select the desired service.

2 Press on the remote control. An icon displays indicating the service to be erased.

•Pressing will turn the erase icon on and off.

•Do not press END to exit the screen here if you wish to register the change.

3 Press OK.

• A confirmation message displays.

4 Press c/dto select “Yes”, and then press OK.

Auto Installation

The TV automatically detects and stores all available services in your area. See Initial auto installation (DTV) on page 8 for details.

NOTE

•If the TV detects a new carrier/service that has become available after performing “Auto Installation”, the message

“Do you want to save?” displays.

Press c/dto select “Yes” or “No”, and then press OK.

Carrier Scan

Manually add a new carrier by entering the desired carrier number or frequency band.

1

2 Press a/b to select “Carrier Scan”, and then press OK.

If you have already set the PIN, enter it here. If not, enter the factory preset PIN “1234”.

Carrier Scan

Channel

35

 

 

Frequency (kHz)

554000

 

 

Select

0...9

DTV MENU

OK

END

 

 

 

 

 

Label

Change individual service names.

1 Press a/bto select the desired service.

2 Press on the remote control. A character set screen displays.

3 Enter new name for the service. See page 23 for operations using the character set screen.

View

Tune to the service shown in the picture window.

1 Press a/bto select the desired service.

2 Press on the remote control.

• The image shown in the picture window changes.

3 Press END to exit the Programme Setup screen to view the image in full screen.

3 Press a/bto select “Channel”, then c/dto enter the carrier number, and then press OK.

•The frequency of the selected carrier in the below cell changes correspondingly.

4 After the scan is complete, the screen shows all available services for the selected range.

5 A confirmation message displays. Press c/dto select “Yes”, and then press OK to save the change.

NOTE

•You can directly enter the frequency instead of step 3. In this case, select “Frequency (kHz)”, enter the number

using - numeric buttons, and then press OK. Use c/dto move between the digits.

•After performing “Carrier Scan”, the order stored by using the “Move” function will revert to the default order.

•See page 17 for setting the PIN.

Installation

This section describes how to reconfigure the DTV settings after conducting Initial auto installation (DTV) on page 8.

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents LC-37SD1E LC-42SD1E Blue Neutral Brown Live Special Note for Users in the U.KContents Trademarks Important Safety PrecautionsPrecautions when transporting the TV Dear Sharp customerShort screws m4 Long screws m4 Supplied accessoriesQuick guide Attaching the standFerrite Core Setting the TVSetting the TV on the wall AntennaInserting the batteries Using the remote control unitAnalogue TV mode Remote control unitUsing 2 on the remote control unit DTV modeTV Rear view TV Front viewUsing the analogue programme list Turning on the powerStandby mode Initial auto installation AnalogueConnecting a game console or camcorder Using external equipmentConnecting a VCR Connecting a DVD playerConnecting a decoder Connecting a PCUsing AV Link function Example Menu operationsMenu operation buttons On-Screen DisplayMenu Operation B Common operationsMenu operations Menu Operation aAdvanced Picture adjustmentsAV Mode Picture menuClear Voice Audio adjustmentsAudio menu SurroundPower Control menu Setup menuAuto Search Menu operations Manual Adjust SortErase Programme Enter the same 4-digit number as in to confirm Resetting the PINInput Label Changing the PINSupply Voltage WSS Wide Screen Signalling TV/DTV/AV onlyOption menu LanguageInput Select For setting the signal type of external equipmentInput source Signal type DNR Digital Noise Reduction TV/DTV/AV onlyAuto Selection Useful featuresMode menu Manual SelectionTeletext function Still imageDTV menu operations DTV menu operation buttons DTV On-Screen DisplayDTV common operations DTV menu operations Programme SetupAbout using the character set screen LanguageMove DTV menu operations FavouriteMove To SkipInstallation Auto InstallationCarrier Scan Configure On-Screen Display and Child Lock settings System SetupCarrier Setup OSD SetupAccessories Inserting a CA card Supplying power to the antennaPress OK to access the CI menu Common InterfaceAbout EPG Useful features DTVUsing the EPG Using the EPG TimerService banner Using the ESG Viewing a service bannerUsing the digital programme list Useful features DTVSample MHEG5 screen Using the multi audio functionUsing the MHEG5 application UK only Displaying subtitlesTroubleshooting Problem Possible SolutionAppendix PC Control of the TV PC compatibility chartRS-232C port specifications AppendixUniversal CommandsRating table for Child Lock Universal Parental RatedSpecifications Optional accessoriesPart name Part number Information on Disposal for Business Users European Union Other Countries outside the EULC-42SD1E LC-37SD1E / LC-42SD1ETINS-C712WJZZ

LC-37SD1E, LC-42SD1E specifications

The Sharp LC-42SD1E and LC-37SD1E are part of Sharp's LCD television lineup that gained popularity for their impressive picture quality and innovative technologies. Designed to meet the demands of home entertainment, these models are distinguished by their advanced features and user-friendly interfaces.

The LC-42SD1E boasts a 42-inch screen, while the LC-37SD1E offers a slightly smaller 37-inch display, making both options suitable for various room sizes. One of the standout features of these televisions is their Sharp's proprietary Aquos technology, which enhances color reproduction and clarity. This technology ensures vivid and vibrant images, providing viewers with a captivating viewing experience perfect for movies, sports, and gaming.

Both models sport a native resolution of 1366x768 pixels, delivering outstanding HD picture quality. The displays utilize a high brightness level, resulting in sharp, easily visible images, even in well-lit environments. Additionally, the high dynamic contrast ratio contributes to deeper blacks and brighter whites, enhancing the overall visual experience.

Connectivity options are plentiful on the LC-42SD1E and LC-37SD1E. They come equipped with multiple HDMI ports, allowing seamless integration with modern devices such as Blu-ray players, gaming consoles, and streaming devices. Furthermore, these models include USB ports and component input for additional connectivity possibilities, making it easy to enjoy content from various sources.

An integral part of the viewing experience is sound quality. Both models feature Sharp's audio technology, which produces clear and balanced sound, complementing the stunning visuals. Enhanced audio settings allow users to tailor the sound experience based on their preferences.

Energy efficiency is another consideration with these televisions. Both the LC-42SD1E and LC-37SD1E are Energy Star certified, promoting responsible energy use without compromising performance. This makes them a great choice for environmentally conscious consumers.

In conclusion, the Sharp LC-42SD1E and LC-37SD1E televisions exemplify a balance of technology, performance, and energy efficiency. With their impressive display quality, robust connectivity options, and user-friendly features, they are ideal choices for anyone looking to enhance their home entertainment experience.
Top Page Image Contents