Supplied accessories
Remote control unit (g1) | AC cord (g1) | Cable tie (g1) | ||
|
|
|
|
|
|
|
|
|
|
Product shape varies in
some countries.
Pages 5 and 6 | Page 4 | Page 4 |
Cable clamp (g1) | 3 RCA to | Stand unit (g1) |
| adapter (g1) |
|
Page 4 |
| Page 9 | Page 3 |
• “AA” size battery (g2) | Page 5 | • Operation manual (This publication) |
|
Quick guide
Attaching the stand
Before performing work spread cushioning over the base area to lay the TV on, making sure the area is completely flat. This will prevent it from being damaged.
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
1 Confirm the 8 screws supplied with the TV.
Short screws (m4) | Long screws (m4) |
2 Attach the two parts of the stand unit to each other using the 4 short screws as shown.
(used in step 2) | (used in step 4) |
3 Insert the stand into the opening on the bottom of the TV.
4 Insert and tighten the 4 long screws on the rear of the TV as shown.
NOTE
• To detach the stand, perform the above steps in reverse order.
3