Sharp LC-46GD7X, LC-52GD7X operation manual Useful adjustment settings, External Audio Bypass

Useful adjustment settings

Speaker Setup		External Audio Bypass
Connecting external speakers		External Audio Bypass automatically optimises the
		audio quality to suit internal (supplied) speakers.
1	Press POWER on the top TV panel to turn it	1	Press MENU and the MENU screen displays.

off.

2

2 Connect external speakers to the TV.

Press c/dto select “Setup”.

Rear view

3

4

Press a/bto select “Speaker Setup”, and then press ENTER.

Press a/b to select “External Audio Bypass”, and then press ENTER.

5	Press c/dto select “Yes” or “No”, and then
	press ENTER.
Selected item		Description
Yes		When you are using your own speakers,
		output the original sound.
No		Sets the optimum audio for the internal
		(supplied) speakers.

RightLeft

External speakers

Connecting speaker cables

1 Push up the tab.

2 Insert the end of the cable into the hole while pressing up on the tab.

3 Release the tab.

CAUTION

•Make sure external speakers have 4 ohm and 15 watt specifications.

•Speaker terminals and speaker cables have plus and minus polarities. Make sure that each polarity of terminals and cables is connected with the same polarity when connecting external speakers.

•Insert the speaker cable’s lead wire carefully so that it goes straight to the hole of the speaker terminal. The speaker cable needs to be firmly inserted until the speaker cable’s lead wire reaches the metal part of the speaker terminal.

40