Sharp LC-46GD7X, LC-52GD7X operation manual Setting the TV on the wall, Removing the stand

Page 8

Preparation

Setting the TV on the wall

•You can mount the TV on the wall, using the optional AN-37AG2/AN-52AG1 bracket.

•For details, refer to the instructions supplied with the optional bracket.

CAUTION

•This TV should be mounted on the wall only with the AN-37AG2/AN-52AG1 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

•You can ask a qualified service personnel about using an optional AN-37AG2/AN-52AG1 bracket to mount the TV to the wall.

•Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-37AG2/AN-52AG1 wall mount bracket. (See the bracket instructions for details.)

Vertical mounting

Angular mounting

NOTE

About setting the TV angle and height adjustment

0˚	For AN-52AG1

10°/5°/10°/15°/20° for LC-46GD7X (0°/5°/10°/15° for LC-52GD7X)

2-5/0/+5 cm (can be moved 5 cm up or down)

AN-37AG2 AN-52AG1

• Detach the cable clamps on the rear of the TV when using the optional mount bracket.

Removing the stand

For wall mounting with the optional bracket, remove the stand.

Before attaching/detaching the stand

•Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.

•Remove all terminal covers and connected cables.

•Make sure two or more people perform the operation.

CAUTION

• Do not remove the stand from the TV unless using an optional bracket to mount it.

1

2

Unfasten the four screws used to secure the stand in place.

Detach the stand from the TV.

(Hold the stand so it will not drop from the edge of the base area.)

NOTE

• To attach the stand, perform the above steps in reverse order.

7

Image 8

Contents LC-46GD7X LC-52GD7X Contents Dear Sharp customerContents TrademarksImportant Safety Precautions Precautions when transporting the TVSupplied accessories Inserting the batteries Using the remote control unitPreparation Setting the TV PreparationRemoving the terminal cover Bundling the cables and closing the terminal coverSetting the TV on the wall Using an optional bracket to mount the TVRemoving the stand Before attaching/detaching the standProtection against overturning Anchoring the TV to the wall or a pillarFixing the TV to the table View from the topConnecting to an antenna Connecting to the AC outletBasic connection Simple operations for watching a TV programmeConnecting a VCR, game console or camcorder Connecting a DVD playerGame console Camcorder DVD playerPreparation Connecting a Digital TV STB Set Top Box Connecting a PCWhen using DVI cable commercially available Digital TV STBVolume display when headphones are plugged Part namesTV Front Regarding the headphone jackTV Rear Part namesRemote control unit FAVTurning on the power Turning off the powerWatching TV Simple button operations for changing channelsWatching TV Using Flashback a on the remote control unitUsing MPX on the remote control unit Simple button operation for changing volume/sound Sleep timerChanging the volume Using Mute e on the remote control unitAnalogue TV When you watch the TV for the first timeANALOG/DTV/RADIO buttons Basic adjustment settings Menu operation buttonsOn-Screen Display ExampleBasic adjustment settings Menu items TV/DTV/INPUT1-3 Menu items HDMI/DVIList of menu items to help you with operations PagesAuto search Auto installation Programme setupBasic adjustment settings Analogue Search tuning Programme Setup Manual Adjust menuFine tuning Colour system SeeColour system menu Colour systemPress a/bto select Colour sys., and then press Enter Setting the child lock Skipping channelsSkip menu Sort menusBasic adjustment settings Analogue Erase Programme Erase programme menusBasic adjustment settings Analogue/Digital AV Mode selectionOPC Optical Picture Control setting Picture adjustments Adjustments itemsColour temperature Quick Shoot AdvancedBlack 3D-Y/CRange of OPC Basic adjustment settings Analogue/Digital MonochromeFilm Mode Audio adjustment Using Surround on the remote control unitUsing Surround on the menu screen Press Surround to switch the Surround function on and offPower Control Power control setting allows you to save energyNo Signal Off No Operation OffBasic adjustment settings Digital DTV input mode menu itemsSelecting DTV mode List of DTV menu items to help you with operationsProgramme Guide Favourite Programme List InfoPress c/d to select Lock or Fav, and then press Enter Press a/bto select your desired rating, and then press EnterPress a/bto select Start Scan, and then press Enter InstallationAuto search starts Press a/b to select Quick Search, and then press Enter Press a/bto select your desired item, and then press EnterTime Setup Using Digital Audio OutputDigital Output MultilingualPlate Setup Information Plate Setup Update Service onlyInformation Press a/bto select Information, and then press EnterUseful adjustment settings Password setting for child lock for TV/DTV input modeResetting the password Setting a passwordUseful adjustment settings Connecting external speakersConnecting speaker cables External Audio BypassInput Signal PC input mode only Input SkipINPUT5 or INPUT6 you wish to Skip, Then press Enter Press Menu to exitAuto Sync. adjustment PC input mode only Fine Sync. adjustment PC input mode onlyPress c/dto adjust the item to your Desired positionAdjustments are stored separately according to input source Input LabelImage position Repeat until the name is fully spelt outWide Screen Signalling WSS WSS signal 43 screen Mode Panorama Mode NormalPicture aspect ratio Press c/dto select On or Off, and then press EnterStandby Mode ResetSelected item Description Mode1 Mode2Auto Selection Wide mode for TV/AV input modeManual Selection Wide mode for PC input mode Input SignalNormal Cinema Full Dot by Dot Full Dot by DotHdmi Setup Audio OnlyDNR Digital Noise Reduction Press a/bto select the desired item, and then press EnterIdentification Language setting for on-screen displayColour system setting Using external equipment Input SelectUseful features Teletext language settingPress Freeze again to cancel the function Freezing imagesTeletext function Useful features Displaying Subtitle Displaying SubpagesTime display Subpage screenTroubleshooting Troubleshooting DTVProblem Possible Solution AppendixRS-232C port specifications AppendixPC Control of the TV Communication conditionsResponse code format PC compatibility chartCommands Specifications Optional accessoriesModel Part name Model numberUnit’s speakers can be attached and removed Removing the speakersBefore attaching/detaching the speakers Dimensional drawings LC-46GD7X, LC-52GD7XClearing the Password 1300 135 Do not Return this Document to Sharp