Sharp LC-46GD7X, LC-52GD7X Basic adjustment settings Analogue/Digital Monochrome, Range of OPC

Basic adjustment settings (Analogue/Digital)

Monochrome

For viewing a video in monochrome.

1	Press MENU and the MENU screen displays.
2	Press c/dto select “Picture”.
3	Press a/bto select “Advanced”, and then
	press ENTER.
4	Press a/b to select “Monochrome”, and
	then press ENTER.

Range of OPC

The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of -16.

1 Repeat steps 1 to 3 in Monochrome.

2 Press a/b to select “Range of OPC”, and then press ENTER.

3 Press a/b to select “Max.” or “Min.”, and then adjust the item to the desired position.

5 Press c/d to select “On”, and then press

ENTER.

Film Mode

Automatically detects a film-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyses it then recreates each still film frame for high-definition picture quality.

1 Repeat steps 1 to 3 in Monochrome.

2 Press a/bto select “Film Mode”, and then press ENTER.

3 Press c/d to select “On”, and then press

ENTER.

NOTE

Selected item	Description
Max.	-15 through +16
Min.	-16 through +15

NOTE

•The range of OPC can only be adjusted when the OPC is set to On.

•The maximum setting cannot be set to a smaller number than the minimum setting.

•The minimum setting cannot be set to a bigger number than the maximum setting.

•The maximum and minimum settings cannot be set to the same number.

•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.

•Film Mode is not selectable depending on the input signal type.

29