Sharp LC-46GD7X, LC-52GD7X operation manual AV Mode selection, OPC Optical Picture Control setting

Basic adjustment settings (Analogue/Digital)

AV MODE selection

AV MODE gives you 7 viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment.

Using AV MODE on the remote control unit

1 Press AV MODE.

• Present AV MODE displays.

2 Press AV MODE again before the mode displayed on the screen disappears.

• The mode changes as shown below.

When the input source is TV, INPUT1, 2 or 3 terminals (Example)

AV MODE: STANDARD	AV MODE: MOVIE
AV MODE: DYNAMIC	AV MODE: GAME
AV MODE: DYNAMIC (Fixed)	AV MODE: USER [TV]

When the input source is INPUT4, 5 or 6 terminals (Example)

AV MODE: STANDARD AV MODE: MOVIE

NOTE

•You can select a different AV MODE item for each input mode. (For example, select STANDARD for TV input and DYNAMIC for VIDEO input.)

OPC (Optical Picture Control) setting

You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions.

Using OPC on the remote control unit

Press OPC to switch the OPC function on and off.

Using OPC on the menu screen

1	Press MENU and the MENU screen displays.
2	Press c/dto select “Picture”.

AV MODE: DYNAMIC

AV MODE: DYNAMIC (Fixed)

AV MODE: GAME

AV MODE: PC

AV MODE: USER []

3	Press a/bto select “OPC”.
4	Press c/dto select the desired item, and
	then press ENTER.
Selected item		Description

Selected item	Description
STANDARD	For a highly defined image in a normally
	bright room
MOVIE	For a movie
GAME	Lowers image brightness for easier viewing.
PC	For PC. (Available only when inputting an
	HDMI or DVI signal.)
USER	Allows the user to customise settings as
	desired. You can set the mode for each
	input source.
DYNAMIC	Changes the image and sound settings to
(Fixed)	the factory preset values. No adjustments
	are allowed.
DYNAMIC	For a clear-cut image emphasising high
	contrast for sports viewing

Off	The brightness is fixed at the value set in
	“Backlight” (See page 27).
On	Automatically adjusts
On: Display	Displays the OPC effect on the screen while
	adjusting the brightness of the screen.

NOTE

•Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.

26