Sharp LC-46GD7X, LC-52GD7X ANALOG/DTV/RADIO buttons, When you watch the TV for the first time

Watching TV

ANALOG/DTV/RADIO buttons

Use the following buttons on the remote control to operate the menu.

When you watch the TV for the first time

When the TV powers on for the first time after purchase, perform the auto installation.

Analogue TV

You can run the auto installation to set channels automatically.

1	To watch the analogue TV, select “Auto
	Installation” from Setup menu. (See page 21.)
2	After setting the channels, you can select a
	channel using CH r/s or 0-9on the
	remote control unit. (See page 15.)

DTV

When the TV accesses to DTV mode for the first time, you need to run the auto search. To scan all available services in your area, follow the procedures below.

1	To watch DTV broadcasts, select “Auto
	Search” from Installation menu. (See page
	35.)
2	After setting the channels, you can select a
	channel using CH r/s or 0-9on the
	remote control unit. (See page 15.)

ANALOG: Press to switch to analogue mode. After switching from DTV, radio or external input mode to analogue mode, the TV jumps to the most recently viewed analogue channel.

DTV: Press to switch to DTV mode. After switching from analogue, radio or external input mode to DTV mode, the TV jumps to the most recently viewed DTV channel.

RADIO: Press to switch to radio mode. After switching from analogue, DTV or external input mode to radio mode, the TV jumps to the most recently tuned radio channel.

18