3Tune in to a station you want while “M” (manual) is flashing.
To tune in to stations of higher frequencies
To tune in to stations of lower frequencies
•If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 200 kHz intervals for FM and 10 kHz for AM) until you release the button.
When an FM stereo broadcast is hard to receive:
1 Press M MODE to enter the functions mode while listening to an FM stereo broadcast.
2 Press MO (monaural), while “MODE” is still flashing on the display, so that the "MONO" appears on the display.
Each time you press the button, monaural mode turns on and off alternately.
MO (monaural) indicator
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved.
Storing stations in memory |
| ||
ENGLISH | |||
|
| ||
You can use one of the following two methods to | |||
| |||
store broadcasting stations in memory. |
| ||
• Automatic preset of FM stations: SSM (Strong- |
| ||
station Sequential Memory) |
| ||
• Manual preset of both FM and AM stations |
| ||
FM station automatic preset: SSM |
| ||
You can preset 6 local FM stations in each FM |
| ||
band (FM1, FM2, and FM3). |
| ||
1Select the FM band (FM1 – 3) you want to store FM stations into.
Each time you press the
button, the band changes as follows:
FM 1 
FM 2 
FM 3 
A M
2Press M MODE to enter the functions mode.
3Press and hold SSM for about 2 seconds.
SSM flashes, then disappears when automatic preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2, or FM3). These stations are preset in the number buttons— No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically tuned in.
11
