Technika LCD22-921 Connecting the LCD TV to a PC, Connecting to a DVD Player External sources

Connecting the LCD TV to a PC

For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set.

•Power off both computer and display before making any connections.

•Use 15-pin D-sub display cable to connect a PC to the LCD TV.

•When the connection is made, switch to PC source. See “Input selection” section.

•Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix

parts.

Audio	PC Input
Inputs
PC audio cable	PC RGB cable
(not supplied)	(not supplied)
to AUDIO INPUTS	to PC input
on the TV

Connecting to a DVD Player and

external sources

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

•If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section.

•Most DVD players are connected through COMPONENT SOCKETS. Use a component video cable to connect video input. For enabling audio, use a component audio cable as illustrated below. When the connection is made, switch to YPbPr source. See, “Input selection” section.

•You may also connect through the SCART socket. Use a SCART cable as shown below.

Note: These three methods of connection perform the same function but in different levels of quality. It is not necessary to connect by all three methods.

	Component	Component
Scart socket	video	audio	HDMI
	inputs	inputs	input

DVD Player

English - 9 -

[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_ 10065841.indd 9 02.11.2009 15:00:08