The operation method may differ depending on the contents of the digital teletext.
Follow the instructions displayed on digital teletext screen.
•When Press “SELECT” button or similar message appears on the screen, press the OK button.
•When the 
button is pressed, the TV returns to television broadcasting.
•With digital terrestrial broadcasting
•The aspect ratio (picture shape) when watching a channel with just digital teletext broadcasting is the same as the aspect ratio of the picture viewed previously.
•When you press the 
button again, the digital teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to the analogue text system. Please do refer to the “TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being transmitted, programmes can be viewed in a number of formats. Press the SCREEN button repeatedly to change zoom mode.
When Auto is selected, the format being displayed is determined by the picture being broadcast.
PLEASE NOTE: Menu size changes depending on the chosen image size.
Dijital TV Menu System
The Digital TV menu can only be viewed when watching digital terrestrial broadcasting. Use the SOURCE button to select DTV mode.
Press the “MENU” button. The menu below appears on the screen:
Channel List
Using the “
” or “
” button on the remote control, make sure that the first item, Channel List, is highlighted and press the OK button to display the Channel List.
The following operations can be performed in this menu:
•Navigating the entire list of channels
•Deleting channels
•Renaming channels
•Adding locks to channels
•Setting favourites
•Moving channels
Channel List is the place where the channels are managed.
Navigating the Entire Channel List
Press “
” or “
” button for selecting the previous or next channel. You can press RED or GREEN button to move page up or page down.
To watch a specific channel, highlight it using “
” or “
” button and then press “OK” button, while the “Select” item on Channel List menu is highlighted by using “
” or “
” button.
Then the name and number of the selected channel will be displayed in the
Moving the channels in the channel list
•Press “
” or “
” buttons to select the channel that will be moved.
•Press “
” or “
” buttons to select the “Move” item on Channel List menu.
Following OSD will be displayed next to “OK” item to indicate that enter a number by using the numeric buttons on the remote control and press “OK” to confirm.
English - 14 -
10065841.indd 14 | 02.11.2009 15:00:10 |