Install Menu in AV Modes, Program Table

HDMI PC Full Mode (optional)

If you want to view PC screen in HDMI mode by using external connection, HDMI PC FULL MODE option should be On to adjust the screen ratio correctly. This item might be inactive in some resolutions.

Note: If you connect an HDMI device and switch the TV to HDMI mode, this feature will be visible (except for 1080i/1080P resolution).

Full Mode (optional)

If you connect a device via HDMI or YPbPr connectors and set 1080i/1080P resolutions, Full Mode item will be visible.You can set Full Mode as 1:1 or Normal by using “” or “”.If you select 1:1, screen ratio will be adjusted correctly. If you set Normal, screen ratio

may expand.

Install Menu

Program

Press “” or “” button to select Program. Use “” or “” button to select the program number. You can also enter a number using the numeric buttons on the remote control. There are 200 programme storage between 0 and 199.

Band

Band can be selected either C or S. Press “” or “

”button to set Band.

Channel

Channel can be changed by “” or “” button or numeric buttons.

Colour System

Press “” or “” button to select Colour System. Use “” or “” button to change the colour system to PAL, PAL 60, SECAM or AUTO.

Sound System

Press “” or “” button to select Sound System. Press “” or “” button to change the sound system to BG,DK, I, L or L’.

Fine Tune

Press “” or “” button to select Fine Tune. Press “

” or “” button to adjust the tuning.

Search

Press “” or “” button to select Search. Use “” or “” button to start programme searching. You can also enter the desired frequency using the numeric buttons while Search item is highlighted.

Store

Press “” or “” button to select Store. Press “” or OK button to store the settings. “Stored...” will be displayed on the screen.

Install Menu in AV Modes

The following screen appears in the install menu when the TV is in AV modes. Note that limited options will be available. Switch to TV mode for viewing complete version of the Install menu.

Colour System

Press “” or “” button to select Colour System. Use “” or “” button to change the colour system to PAL, SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.