Technika LCD22-921 manual Analogue TV Menu System, Picture Menu

you will be asked whether or not to delete the settings. Selecting “Yes” by pressing OK button while the “Yes” is highlighted will delete the existing channel table.

Then you will be asked to confirm for deleting all channels and settings:

By selecting Yes and pressing the OK button, the existing channel table will be deleted.

After factory settings are loaded, “First Time Installation” menu will be displayed.

The menu which is displayed for language selection appears on the screen at first. By using “” or “” buttons, select the desired language option, and press OK button to activate.

After then, “First time installation” OSD will appear on the screen. By pressing “” or “” buttons, select the Country you want to set and press OK button (* only for EU countries).

-Next, active antenna mode selection OSD will appear on the screen.Use “” or “” to set and press OK to continue.See the section, “Initial Settings” for more information.

After active antenna mode option is selected, a message asking for automatic search appears on the screen:

Press the OK button to start installation. After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen.

This process is same as described in Automatic Search section.

Analogue TV Menu System

Picture Menu

Mode

For your viewing requirements, you can set the related mode option.

Press “” or “” button to select Mode. Press “

”or “” button to choose from one of these options: Cinema, Dynamic and Natural.

Brightness/Contrast/Colour/Sharpness/ Hue

Press “” or “” button to select the desired option. Press “” or “” button to set the level.

Note: Hue option can only be visible when the TV receives an NTSC signal.

Colour Temp

Press “” or “” button to select Colour Temp. Press “” or “” to choose from one of these options: Cool, Normal and Warm.

Note:

•Setting Cool option gives white colours a slight blue stress.

•Setting Warm option gives white colours a slight red stress.

•For normal colours, select Normal option.

Noise Reduction

If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount.

Press “” or “” button to select Noise Reduction. Press “” or “” to choose from one of these options: Low, Medium, High or Off.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes.

English - 21 -

[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_ 10065841.indd 21 02.11.2009 15:00:14