•Some CAMs may require the following set up. Please set the CAM by entering the Digital TV menu, Conditional Access then pressing the OK button. (CAM set up menu is not displayed when it is not required.)
•To see the viewing contract information: enter Digital TV; press the “MENU” button, then highlight Conditional Access and press the OK button.
•When no module is inserted, “No Conditional Access module detected” message appears on the screen.
•Refer to the module instruction manual for details of the settings.
NOTE: Insert or remove the CI module only when the TV is switched off or in standby mode.
TV Setup
You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from the main menu. Press the “MENU” button to display the main menu and use “
” or “
” button to highlight “TV Setup”, press the OK button to display TV Setup menu screen.
You can find detailed information for all menu items in “Analogue TV Menu System” section.
Setup
The adjustments in this menu are given as the following:
Configuration
You can configure the settings of your TV. Select Configuration from Setup menu and press OK to view this menu. Press the EXIT button on the remote control to exit.
AC3 Audio (* for EU countries only)
In the Configuration Menu, highlight the AC3 Audio item by pressing “
” or “
” buttons. Use the “
” or “
” buttons to set the AC3 Audio as On or Off.
If the channel that you are watching supports AC3 Audio, turn this setting on.
Hard of Hearing (* for EU countries only)
Use “
” or “
” button to select Hard of Hearing and then press “
” or “
” button to set this setting as On or Off.
If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals.
Favourite Mode
Use this function to enable or disable favourite mode. Press “
” / “
” button to set this function as on or off.
Channel List
Use “
” or “
” buttons to go to Channel List option. Use “
” or “
” buttons to toggle Channel List Mode. If you select “TV Only”, with the “
” or “
” buttons, you navigate through only TV channels. If you select “Radio Only”, with the “
” or “
” buttons, you navigate through only radio channels. If you select “Text Only”, with the “
” or “
” buttons, you navigate through only text channels.
Active Antenna
Use “
” or “
” buttons to highlight Active Antenna option.
When antenna power option is set as On by pressing “
” or “
” button, +5V will be transmitted to the antenna output.
This feature enables the use of active antenna.
Note: Antenna power should be “Off” when standard antenna is used instead of the active antenna.
Scan Encrypted (**)
(**)for UK broadcasts only.
Scan Encrypted Channel feature will always be ON after performing first time installation. When this setting is on, search process will locate the encrypted channels as well. If it is set as OFF manually, encrypted
English - 17 -
10065841.indd 17 | 02.11.2009 15:00:11 |