IDTV Menu System
The IDTV menu can only be viewed when watching digital terrestrial broadcasting. Press the “
”button to turn IDTV on while the TV is in analogue mode.
Press the “M” button. The menu below appears on the screen:
Channel List
Using the “
” or “
” button on the remote control, make sure that the first item, Channel List, is highlighted and press the OK button to display the Channel List.
Channel List is the place where the channels are managed.
Navigating the Entire Channel List
Press “
” or “
” button for selecting the previous or next channel. You can press P+ or P- button to move page up or page down.
To watch a specific channel, highlight it using “
” or “
” button and then press “OK” button, while the “Select” item on Channel List menu is highlighted by using “
” or “
” button.
Then the name and number of the selected channel will be displayed in the
Moving the channels in the channel list
•Press “
” or “
” buttons to select the channel that will be moved.
•Press “
” or “
” buttons to select the “Move” item on Channel List menu.
Note: If you enter the same programme number of the channel that you want to move, “.... channel
services will be replaced. Do you want to continue?” OSD will be displayed. Press OK to confirm or select “No” to cancel.
Deleting the Channels in the Channel List
•Press “
” or “
” button to select the channel that will be deleted.
•Press “
” or “
” button to select the “Delete’’ item on Channel List menu.
Press the OK button to delete the highlighted channel in the channel list. Then the message below appears on the screen:
Press “
” or “
” button to highlight the desired option. If OK button is pressed while “Yes” is highlighted, the highlighted channel is deleted. Selecting “No” cancels the deletion.
English - 14 -
_ | 50164710..indd 14 | 17.02.2010 14:17:14 | |
|
|
|
|