
Menu: shows the language of the system
Preferred
These settings will be used if available. Otherwise the current settings will be used.
•Audio: by pressing “” or “
” keys change the audio language.
•Subtitle: alter the subtitle language with “” or “
” keys. The chosen language will be seen in subtitles.
Movie Subtitle (optional)
•In order to display subtitles properly, use this setting to select a movie subtitle language.
•By pressing “” or “
” button, select the desired language option.
•Guide: By pressing “” or “
” buttons change the guide language.
Current
•Audio: if audio language is supported change the audio language by pressing “” or “
” buttons
•Subtitle: if subtitle is backed up, alter the subtitle language with “” or “
” buttons. The chosen language will be seen in subtitles.
Note: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below:
Language Settings
In the configuration menu, highlight the Language Settings item by pressing “” or “
” buttons. Press OK and Language Settings submenu will be displayed on the screen:
Use “” or “
” buttons to highlight the menu item that will be adjusted and then press “
” or “
” button to set.
Notes:
•System Language determines the
•Audio Language is used for selecting the soundtrack of a channels.
•Primary settings are the first priority when multiple choices are available on a broadcast. Secondary settings are the alternatives when the first options are not available.
Installation
The Installation menu is mainly intended to help you for creating a Channel Table in the most efficient way. Select Installation from the Configuration menu by pressing “” or “
” buttons.
Automatic Channel Scan
Automatic channel scan is started by pressing OK button while Automatic channel scan item is highlighted.
The following message appears on the screen:
Highlight Yes or No by using “” or “
” buttons and press OK button to confirm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen:
Press the OK button to search for analogue channels. The following menu appears on the screen for analogue channel search:
English - 19 -
_ | 50164710..indd 19 | 17.02.2010 14:17:17 | |
|
|
|
|