Sleep Timer, Child Lock, Default Zoom | Technika LCD40-920 guide

Using “” or “” button, you can switch to PIP, PAP mode or turn off the feature.

If the TV is switched to PIP or PAP mode, Pip-Pap submenu will change accordingly and the following settings will appear on the same menu screen.

Note that if you switch to PAP mode by using Pip-Pap setting, only Source and Swap options will be active among the menu settings.

Pip-Pap

This line controls Pip/Pap modes. Use “” or “” buttons to switch the TV to Pip, Pap or Off.

Pip Size

Using this setting, you can set the size of the Pip window. Press “” or “” button to highlight Pip Size item. Use “” or “” button to set Pip Size to Small or Large.

Note: This setting will be inactive if the TV is set to Pap mode.

PIP Position

This setting is used for moving the sub picture.

Select PIP Position	item by using “	” or
“ ” button. Use “ ” or “	” button to adjust	PIP
position.

Positions available are: Bottom Right,Bottom Left, Top Left and Top Right.

Source

PIP Source setting enables you to select the source of the sub picture.

Select PIP Source item by using “” or “” button. Use “” or “” button to set PIP source.

Program

This setting will be unavailable to be used.

Swap

Select Swap item by using “” or “” button. Use “ ” or “” button to set. This function enables to swap

between the main and the PIP picture.

Note: See Appendix E for all PIP/PAP modes.

Sleep Timer

Press “” or “” button to select Sleep Timer. Use “” or “” button to set the Sleep Timer.

The timer can be programmed between Off and 120 minutes in steps of 10 minutes.

If Sleep Timer is activated, at the end of the selected time, the TV goes automatically to standby mode.

Child Lock

Press “” or “” button to select Child Lock.

Use “” or “” button to set the Child Lock On or Off. When On is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons (except for the STANDBY button) will not work.

Hence, if one of those buttons is pressed, Child Lock On will be displayed on the screen when the menu screen is not visible.

Language

Press “” or “” button to select Language. Use “” or “” button to select the Language.

Default Zoom

While zoom mode is set as AUTO, the TV will set the zoom mode in accordance with the signal of the broadcast. If there is no WSS or aspect ratio information, the TV will then use this setting to adopt. Press “” or “” button to select Default Zoom. You can set Default Zoom to Panoramic, 16:9, 4:3 or 14:9 by pressing “” or “” button.

Blue Background

If the signal is weak or absent, the TV will automatically change to a blue screen. To enable this, set Blue Background to On.

By pressing “” or “” button, select Blue Background. Press “” or “” button to set Blue Background as On or Off.

Menu Background

Press “” or “” button to select Menu Background. You can set menu background level by pressing “” or “” button.

Backlight

This setting controls the backlight level. Select Backlight by pressing “ ” or “ ” button. Press“ ” or “” button to set Backlight to Auto, Medium, Maximum or Minimum.

Menu Timeout

To set a speciﬁc display timeout for menu screens, set a value for this option.

English - 23 -

[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_10064946	_	50164710..indd 23	17.02.2010 14:17:20