Channel, Closed Caption | TTE Technology LE32HDF3010S instruction

Menu Operation

Select the OSD menu language from English, Spanish, or French.

Channel

Signal Source: Choose the signal source (“Cable/ Sat” or “Antenna”) you have connected to the

ANT/CABLE/SAT IN.

Scan: When you perform a Channel Scan, your TV searches for channels with signals and stores the channel information in the Channel List. Then, as you watch TV and press CH+ or CH-, your TV goes to the next or previous channel in the Channel List and skips the channels that do not have signals. If the TV signal source changes – for example, if you change from an outdoor antenna to cable TV – you will need to rescan for channels.

To automatically scan for channels:

1.After choosing a signal source, select Setting > Channel > Scan.

2.Press OK/► to start the scan. You can see the search progress and how many channels are found in the on-screen menu. (Note: If you wish to stop the search, press the CLEAR button.)

3.After the scan is complete, the unit will exit menu automatically.

Favorite:

1.Select “Setting > Channel > Favorite”, press OK/► to enter, a list of available channels displayed.

2.Press ▲/▼ to select the desired chanel, then press OK to set it as the favorite, and a heart icon appears to the right side of the channel indicating this channel already stored in the favorite channel list.

3.Set other favorite channels the same way.

4.You can easily select the favorite channel to watch using FAV and ▲/▼ buttons.

Show/Hide: You can hide channels in the Channel List. Then, when you press the CH+ or CH- button, the TV will skip the hidden channels. You can still tune to these hidden channels by pressing the number of the channel on the numeric keypad.

To hide specific channels:

1.Select “Show/Hide”, press OK/► to open the submenu.

2.Press ▲/▼ to highlight the channel you wish to hide; then press OK to check the highlighted channel. You can add the channel back into the Channel List by highlighting it and un-checking it.

3.Repeat the process to hide additional channels.

4.Press MENU to return to the previous menu, or press CLEAR to close the menu.

DTV Signal: Show the condition of DTV signal: Good or Bad, Normal. Bad for no DTV signal or very weak DTV signal.

Closed Caption

Many programs are encoded with closed captioning information, which allows you to display the audio portion of a program as text on the TV screen.

Note: Closed caption settings are not available for HDMI, CMPT or PC inputs. These settings must be set in the connected component’s menu. Closed captioning is not available on all channels at all times. Only specific programs are encoded with closed captioning information.

The Closed Caption options are:

CCMode: This option allows you to choose the way closed captioning information appears on the screen.

CCOff - No captioning information displayed.

CCOn - Chooses this option if you want captioning information to be shown whenever available.

On When Mute - This option allows the closed captioning to display (when available) whenever the TV’s sound is muted. The captioning information is not displayed when the sound is not muted.

Analog CC Option: This option lets you select the captioning mode (CC1-CC4, TEXT1-TEXT4, Off) used for displaying caption information, when available. If you are unsure of the differences among the modes, you may prefer to leave the closed captioned mode set to CC1, which displays complete text of the program in the primary language in your area.

Digital CC Option: If available, this allows you to select a closed caption service mode (1-6) for digital channels.

CC Option

Mode - Select either “Default” or “Custom” options. “Custom” mode allows you to set the options below.

Font Style - Allows you to choose a character design for the digital closed caption text. A font is a complete assortment of letters, numbers, punctuation marks, etc. in a given design. You can choose from a variety of fonts.

Font Size - Allows you to set the size of the