Menu Operation
Advanced Settings
Zoom Mode: Selects the desired screen format. The screen format may vary depending on the incoming signal.
3DNR (Noise Reduction): This setting reduces picture “static” or any type of interference. This feature is especially useful for providing a clearer picture in weak analog signal conditions. Choose between these options:
Auto for auto noise reduction adjustment.
Low for a softer, smoother picture that retains picture sharpness and detail.
Medium for a slightly softer picture than the Low setting.
High for an even softer, smoother picture than the other settings (the picture detail is somewhat decreased).
Off for no adjustment.
Film Mode – Select “On” to automatically detect a
Sound Menu
The “Sound” menu lets you adjust audio output. To access the “Sound” Menu, press MENU on the remote, and then use ▲/▼ to select “Sound”. Press OK/► to enter. The following options will be displayed:
Equalizer
The
Sound Mode: Allows you to choose a specific
sound preset: “Standard, Music, Movie, Sports and Personal”.
Balance: Adjust the amount of audio sent to the left and right speakers.
Frequency Range: Choose a band and make adjustments. When making adjustments, the “Sound Mode” option automatically changes to “Personal”. Press ▲/▼ to select the desired frequency (100Hz, 300Hz, 1.5KHz, 5KHz, 10KHz) you wish to adjust. Use ◄/► to adjust the level.
Speaker
Option “On/Off”. When you select the “Off” option, the sound speaker on the TV will be turned off.
SPDIF Type
This option controls the type of audio stream sent to the Digital Audio Output jack (SPDIF OUT). Available options are “Dolby Digital, PCM”.
Smart Volume
Option “On/Off”. This option reduces the annoying blasts in volume that often occur during commercial breaks, and also amplifies softer sounds in program material, eliminating the need for constant volume adjustment.
MTS
This option controls the manner in which the sound comes through your speakers. Options available vary according to the input selected.
Note: The MTS option is only available for analog channels.
Mono (available for regular TV viewing only): This option plays the sound in mono only. Use this setting when receiving broadcasts with weak stereo signals.
Stereo: This option splits the incoming stereo audio signal into left and right channels. Most TV programs and recorded materials have stereo audio.
Second Audio Program (SAP): This option plays the program’s audio in a second language, if available. SAP audio is broadcast in mono only. SAP is also used to broadcast a program’s audio with descriptions of the video for the visually impaired.
Audio Language
Choose from the list of languages available for the program you’re watching. The language chosen becomes your preferred language for all digital channels until you turn the TV off. If the language chosen is not being broadcasted with a program, the TV plays the default language for the program (usually “English” in the US).
Note: The “Audio Language” option is only available for digital channels.
Settings Menu
The “Settings” menu allows you to configure the TV with your preferences. Press MENU to diaplay the menu screen. Press ▲/▼ to select “Settings”; then press OK/► to display the following options:
Language
14