Univex 5.4 manual Limited Mode, Fixed Channel Mode

Page 13

LIMITED MODE

You can program your remote control in Limited Mode to keep from accidentally changing the channel on your TV or VCR. When Limited Mode is enabled, you cannot select TV mode. If you press the TV button while TV mode is programmed in Limited Mode, the TV button flashes and the SAT button lights, telling you cannot switch to TV mode. The remote then moves back to SAT mode.

When you use the remote to control your TV in Limited Mode, you are only be able to use the POWER, MUTE, and VOLUME buttons to control your TV. Also, when you use the remote to control your VCR in Limited Mode, you are only be able to use the POWER and VCR function buttons. The section Programming Using the Equipment Code Tables (page 4) has a step that tells the remote control to go into Limited Mode. Also, a quick way to put the remote in Limited Mode is on page S-3, Placing Your Remote in Limited Mode.

Note: Limited Mode cannot be used with audio amplifiers.

FIXED CHANNEL MODE

You can program your remote control in Fixed Channel Mode to automatically set the TV and/or VCR to a given channel when you press either RECOVER or the SAT button.

SETTING (OR CHANGING) FIXED CHANNEL MODE FOR TV AND/OR VCR

1Press and hold the TV or VCR mode button until all four mode lights illuminate.

2Press the STAR key (*). Enter a channel, using two or three digits between 02 and 125. For example, to set channel 25, enter *25.

3Press the POUND (#) key. The TV or VCR mode button flashes three times.

REMOVING FIXED CHANNEL MODE FOR TV AND/OR VCR

1Press and hold the TV or VCR mode button until all four mode lights illuminate.

2Press the STAR (*) key followed by two zeros (*00).

3Press the POUND (#) key. The TV or VCR mode button flashes three times.

3

Image 13
Contents User Guide Remote ControlPage SETUP AND OPERATION Table of ContentsQuick Setup OperationMaking the Remote Work With Your Receiver Insert the BatteriesQuick1Setup Program the Remote to Control Your TV How to Use the Recover Button Placing Your Remote in Limited ModeQuick Setup/Operation If You Lose Your PictureSAT Mode Remote OperationOperation Up/Down Arrow TV ModePicture-In-Picture Number ButtonsVCR Mode Page USING THE GUIDE REMOTE CONTROL OVERVIEWREMOTE CONTROL MODES PROGRAMMING FOR OTHER EQUIPMENT HOW THE REMOTE COMMUNICATESTVs, Remote Operation TV Mode, page S-5 VCRs and DVD players, Remote Operation VCR Mode, page S-6FIXED CHANNEL MODE LIMITED MODEInstructions PROGRAMMING USING EQUIPMENT CODE TABLESAdditional Information Scanning for Equipment CodesAdditional Information SCANNING FOR EQUIPMENT CODES4 Press POWER Control Amplifier Volume SWITCHING BETWEEN TV AND AMPLIFIER VOLUME CONTROLPROGRAMMING THE REMOTE TO CONTROL A SECOND RECEIVER IN AUX MODE READING OUT THE REMOTE CONTROL CODES CHANGING THE REMOTE AND RECEIVER ADDRESS DISCRETE CODES FOR LEARNING REMOTES3 Press POWER not TV POWER 6 Press SELECT to close the System Info screen EQUIPMENT CODES TV CODESTV CODES CONTINUED VCR CODES VCR CODES CONTINUED TUNER/AMPLIFIER CODES DVD PLAYER CODESProgramming in AUX mode Press 2 before entering the tuner amplifier codeTUNER/AMPLIFIER CODES CONTINUED TV/VCR COMBO CODESTV/VCR/DVD COMBO CODES TV/DVD COMBO CODESTV/VCR/TUNER COMBO CODES Table continues on next pageTV/VCR/TUNER COMBO CODES CONTINUED VCR/DVD COMBO CODESRemote to Control Your TV on TROUBLESHOOTINGpage S-2 and Programming for Other Equipment on pageSee Program the Remote to SAT mode see Remote ControlControl Your TV on page S-2 at Programming for OtherLIMITED WARRANTY ACCESSORY WARRANTY IF YOU NEED HELP2. See Troubleshooting on page DISH NETWORK’S EXCHANGE PROGRAMSPUBLISHING INFORMATION REGULATORY FACTORSPage Page Page Page To read out your remote codes, see page 9 for instructions at 1-800-333-DISH3474 For all your customer needs call the Customer Service Center167821