Univex 5.4 SAT mode see Remote Control, See Program the Remote to, Control Your TV on page S-2 at

What’s	What’s Wrong	What You Can Do
Happening
Your picture	• You have	• Make sure your TV (and VCR, if
is snowy (or	accidentally	connected) is tuned to the correct
blue or	changed the	channel. Also try using the
black).	channel on your	Recover button as described on
	TV.	page S-3,If You Lose Your Picture
		(How to Use the Recover Button).
Your remote	• The remote	• Make sure the remote control is in
control isn’t	control is in the	the correct mode. For example, if
working	wrong mode.	you want to use the satellite
		receiver, put the remote control in
		SAT mode (see Remote Control
		Modes on page 1).
	• You might be	• Make sure you are using the
	using the wrong	correct remote control (TV1 or
	remote control	TV2) for your locations (multi-
	(TV1 or TV2).	room receivers only).
	• Your batteries	• Change the batteries as described
	are worn out.	on page S-1 in Insert the Batteries.
When you	• Maybe you have	• See Program the Remote to
press the	not set up the	Control Your TV on page S-2 at
remote	remote control.	the beginning of this guide and
control Mute		Programming for Other
or Volume		Equipment on page 2.
button,
nothing	• Maybe you’re
happens.		• Set up the remote to control either
	trying to control
	TV volume but	TV volume or tuner/amplifier
	you set up the	volume, whichever you want. See
	remote to	page 7.
	control a tuner
	or amplifier in
	AUX mode.
Your PIP	• Your receiver	• Upgrade to a receiver with this
(Picture-In-	doesn’t use PIP.	feature.
Picture)
button isn’t
working.

21