PROGRAMMING USING EQUIPMENT CODE TABLES
You can set up the remote to control other equipment using the equipment codes listed on page 12 and the modes as shown on page 1.
| Instructions | Additional Information |
|
|
|
1 | Turn the equipment on. | Use the equipment’s front panel |
|
| buttons or its remote control. |
2 | Find the brand name of the | If the brand isn’t listed, see |
| equipment in the tables | Scanning for Equipment Codes |
| starting on page 12. | on page 5. |
3 | Press and hold the mode | For example, hold the TV mode |
| button until all the other | button for a TV until all of the |
| mode buttons light up, and | other mode buttons light. When |
| then let go of the button. | you let go, TV flashes. |
| The mode button flashes. |
|
4For AUX mode only. Press 0 for a second TV, or 1 for a second VCR, or 2 for a tuner or amplifier.
5Enter one of the
6If you want to program Limited Mode, press 1. If not, skip to step 7.
7Press POUND (#).
This step is for programming the kind of equipment that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 5.
The
See Limited Mode on page 3 for more information.
If you entered the code correctly, the mode button flashes three times.
8Press POWER to turn off the equipment. If the equipment does not turn off, go to step 10.
If the code works, the equipment turns off.
4