RCA 27V550T manual Other Information

Page 28

Other Information

Noisy stereo reception

¥ May be a weak station. Access the SOUND menu, highlight Sound Type and then choose Mono.

No picture, no sound but TV is on

¥Maybe the signal type is set wrong. Go to page 23 for detailed instructions.

¥The channel might be blank Ñ change channels.

¥If youÕre watching your VCR and itÕs connected with coaxial cable to the TV ANT jack, tune the TV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR).

Sound okay, picture poor

¥Check antenna connections. Make sure all of the cables are firmly connected to the jacks.

¥Try adjusting sharpness function to improve weak signals. Go to page 23 for more instructions.

Black box appears on the screen

¥Closed-captioning might be on. Check Closed Caption in the SETUP menu. Go to page 23 for more instructions.

PASSWORD menu appears

¥KidPass option is activated and you try to reset the time.

¥You turn the TV on after KidPass shut off the TV.

The Remote Control Doesn’t Work

¥Something might be between the remote and the remote sensor on the component. Make sure there is a clear path.

¥Maybe the remote isnÕt aimed directly at the component (TV, VCR, etc.) that youÕre trying to operate.

¥Maybe remote is not in TV Mode. Press the TV button so the remote will operate the TV.

¥Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote. (Note, if you remove the batteries, you may have to reprogram the remote to operate other components.)

¥You might need to reset the remote: remove batteries and press the number 1 button for at least 60 seconds. Release the 1 button, replace the batteries, and (if necessary) program the remote again.

Problems with V-Chip/Parental Controls

The rating limits don’t work

¥You must activate the settings. Go to the MAIN MENU (press MENU on your remote), select Parental Control, highlight and turn on V-Chip active (box has check mark).

I don’t remember my password and I want to unlock the TV

¥If you forget your password you can reset it. Make sure the TV is off. Simultaneously press and hold VOL< on the TVÕs front panel and CLEAR on the remote for approximately 5 seconds. Enter a new password next time you access the PARENTAL CONTROL menu.

The V-Chip won’t let me watch a program even though it’s not rated as violent.

¥Maybe the movie was given an NR (Not Rated) status. After you block movie ratings, you must unlock NR separately in order to view movies with an NR rating.

Problems with VPORT Connection

No picture

¥Press the INPUT button until VPORT appears on-screen.

¥If using the Component video to VPORT cable, make sure the cables to the other component are connected correctly.

26

Graphics contained within this publication are for representation only.

Chapter 5

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Changing Entertainment. Again Retourner le cahier pour la version française Tocom 1616232BProduct Registration Important InformationProduct Information Table of Contents Table of Contents Things to Consider Before You Connect ChapterConnections & Setup Connect your DVD Player to your TVConnect your TV to your VCR Make sure cable or antenna is connected to your VCRConnect your TV to a DVD player Using the Vport JackConnect your TV to an Xbox video game system Explanation of Jacks Audio L/MONO VideoFront of Your TV Plug in the TVPut batteries in the remote Front Panel ButtonsInitial Setup Complete the Initial SetupHow to Use the Remote Control to Complete Turn on the TVButton Descriptions for TV Mode VOL or VOL + Decreases or increases the TVÕs volumeIndicator Button Descriptions for DVD and VCR ModesUsing the Remote Control Using the Input ButtonProgramming the Remote to Operate Other Components Find Out If You Need to Program the RemoteUsing Direct Entry Using Automatic Code SearchTurn on the component you want to operate VCR or DVD player Remote Control Codes How to Use the Remote After You’ve Programmed ItVCR Codes Programmable for VCR and Vport buttonsDVD codes VCR CodesProgrammable for DVD and Vport buttons How to Set Up the Auto Tuning Feature Why You Should Use the Auto Tuning FeatureChannel Banner Using the TV’s Features Parental Controls and V-ChipUSA V-Chip Rating System How V-Chip WorksCanadian English V-Chip Rating System Canadian French V-Chip Rating System USA V-Chip TV Rating Limit Blocking Specific Content Themes Viewing Specific Content ThemesHierarchy of Age-Based Ratings Blocking Age-Based RatingsBlocking Canadian V-Chip Ratings Chip Movie Rating LimitChip Exempt Program Block Blocking Movie RatingsChange Password KidPassChip Active Front Panel LockSound Menu Picture MenuUsing the TV’s Menu System Setup MenuParental Control Menu Time MenuTroubleshooting Other Information Limited Warranty Care and CleaningNo sound or poor sound What your warranty does not cover Product Registration Limitation of WarrantyHow state law relates to this warranty If you purchased your product outside the United StatesAccessory Information Remote Control This is Standard Audio/Video cable withXbox to Vport Cable Component Video to Vport CableNorth Meridian Street Indianapolis, Transforme encore le divertissement Flip over for English Tocom 1616232BInformation importante Enregistrement du produit Information sur le produitChapitre 1 Connexions et rŽglage Chapitre 2 Utilisation de la tŽlŽcommandeChapitre 3 Utilisation des fonctions du tŽlŽviseur Chapitre 4 Utilisation du systŽme de menus du tŽlŽviseur Table des matiresChapitre 5 Autres informations ProtŽgez vos composants contre la surchauffe PrŽvenez les surtensionsUtilisez un Žclairage indirect Connexions et rŽglage TŽlŽviseur + DVD + magnŽtoscopeConnectez votre lecteur DVD à votre téléviseur Connectez votre téléviseur à votre magnétoscopeConnectez votre téléviseur à un lecteur DVD Utilisation de la prise VportConnectez votre téléviseur à un système de jeux vidéo Xbox Explication des prises VideoInsertion des piles dans la tŽlŽcommande Avant du tŽlŽviseurBranchement du tŽlŽviseur Boutons du panneau avantExŽcution de lÕinstallation initiale Mise en marche du tŽlŽviseurRecherche automatique complte de canaux FlchesDescription des touches pour le mode TV Description des touches pour les modes DVD et VCRUtilisation de la tŽlŽcommande Comment savoir si vous devez programmer la tŽlŽcommandeProgrammation de la tŽlŽcommande Utilisation de la touche InputUtilisation de la recherche automatique du code Codes de tŽlŽcommande Utilisation de la tŽlŽcommande une fois programmŽeCodes pour magnŽtoscopes suite Codes pour lecteurs DVDPourquoi utiliser la fonction de syntonisation automatique Bannire de canalRŽglage de la fonction de syntonisation automatique Utilisation des fonctions du tŽlŽviseur Contrle parental et V-chipSystme de filtrage TV pour les ƒ-U Fonctionnement du V-chipSystme de filtrage TV pour le Canada anglais Systme de filtrage TV pour le Canada franais Filtrage TV pour les ƒ-U Filtrage TVBlocage de thmes particuliers Visionnement de thmes particuliersFiltrage des films V-chip Blocage pour le filtrage canadien Blocage des Žmissions sans codeKidPass Chip activŽVerrouillage du panneau avant Changement de mot de passeMenu Son Menu ImageMenu Installation Utilisation du systme de menus du tŽlŽviseurMenu Contrle parental Menu HorlogeDŽpannage Problmes posŽs par le tŽlŽviseurAutres informations La tŽlŽcommande ne fonctionne pasProblmes avec les Contrle parental ou le V-chip Problmes avec la connexion Vport Entretien et nettoyageGarantie limitŽe Absence dÕimageEnregistrement du produit Limitation de la garantie Ce que ne couvre pas votre garantieLÕeffet des lois provinciales sur cette garantie Informations sur les accessoires Pour passer une commande800 Câble Xbox à VportThomson
Top Page Image Contents