Sony SLV-ED215TH, SLV-ED313ME, SLV-ED313MJ, SLV-ED313SG, SLV-ED115PS Do this on the VCR, Commander

3 EASY TIMER	Push the EASY TIMER knob to finish setting the clock.
	The VCR enters the timer recording setting mode.
	To continue the Easy Timer
		SP	START
	setting, go to step 2 in		APC
	“Setting the Easy Timer” on
	page 24.

To quit the Easy Timer setting mode without changing any settings, push the EASY TIMER knob repeatedly until the t indicator appears in the display window.

To set the timer and clock setting using the remote commander

You can also use the remote commander to set the Easy Timer and Easy Clock. The operations on the VCR and the remote commander correspond as follows:

To	Do this on the VCR	Do this on the remote
		commander
Confirm the setting and go to	Push the EASY TIMER	Press
			EASY TIMER
the next setting	knob
Change the time by 15 minutes	Turn the EASY TIMER	Hold PROG +/– down
(in START/STOP mode)	knob or hold PROGRAM
	+/– down
Change the time by one minute	Press PROGRAM +/–	Press PROG +/–
(in START/STOP mode)
Select the programme	Turn the EASY TIMER	Press PROG +/– or
	knob or press PROGRAM	INPUT SELECT
	+/–
Change the hour/minute by	Turn the EASY TIMER	Press PROG +/–
one hour/minute (in CLOCK	knob or press PROGRAM
mode)	+/–

You can also use the programme number buttons to set the clock, start and stop times, and the programme you want to record. Just press the programme number buttons to enter the hours and minutes. For example:

•To set the clock to “8:20”, press 0, 8, EASY TIMER , 2, 0 and EASY TIMER in sequence.

•To set the start or stop time to “8:20”, press 0, 8, 2, 0 and EASY TIMER in sequence.

If you make a mistake, re-enter the correct digits before pressing

EASY TIMER .

continued

Basic Operations

01GB04BAS-ED313.p65 27 10/1/01, 14:25

Basic Operations

27

SLV-ED313ME GB 3-065-583-11 (1)