Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip this step.
?/1 ON/STANDBY |
|
|
| RF CHANNEL PROGRAM +/– |
|
|
|
|
1 | ON/STANDBY | Press ?/1 ON/STANDBY to turn on the VCR. | |
|
|
|
|
|
|
|
|
2 |
|
| Press RF CHANNEL on the VCR. |
The
RF CHANNEL about three seconds. (RF32 is for
Press RF CHANNEL again while the RF channel is flashing.
The VCR signal is output through this channel to the TV.
SP
APC
3 | Turn on your TV and select a programme position for the VCR picture. |
This channel will now be referred to as the video channel.
Some TVs reserve a programme position, such as “0”, for a VCR. In this case, select the reserved programme position for the VCR picture. Refer to your TV’s instruction manual for details.
Getting Started
continued
Getting Started
7
7 | 10/1/01, 14:24 |