Sony SLV-ED215TH Operation When recording on this VCR, Before you start editing, To stop editing

Page 45

Operation

(when recording on this VCR)

Before you start editing

•Turn on your TV and set it to the video channel.

•Press INPUT SELECT or PROG +/– to display “L” in the display window.

•Press REC SPEED to select the tape speed (SP or LP for the PAL system, and SP or EP for the NTSC system).

XPAUSE

z REC

1 Insert a source tape with its safety tab removed into the other (playback) VCR. Search for the point to start playback and set it to playback pause.

2 Insert a tape with its safety tab in place into this (recording) VCR. Search for the point to start recording and press X PAUSE.

3

4

Press z REC on this VCR and set it to recording pause.

To start editing, press the X PAUSE buttons on both VCRs at the same time.

To stop editing

Press the x STOP buttons on both VCRs.

Tips

•To edit more precisely, press the X PAUSE buttons on the VCRs to release pause.

•To cut out unwanted scenes while editing, press X PAUSE on this VCR when an unwanted scene begins. When it ends, press X PAUSE again to resume recording.

Note

•If you start recording following the procedure above, the VCR will not start recording with the APC function. To record a tape with the APC function, press z REC again during recording pause in step 3 so that the VCR analyses the tape. Then when you start recording in step 4, press X PAUSE after the APC indicator stops flashing. If you press X PAUSE before the APC indicator stops flashing, the APC function is cancelled.

Additional Operations

01GB06ADO-ED313.p65

45

10/1/01, 14:26

45

SLV-ED313ME GB 3-065-583-11 (1)

Image 45

Contents SLV-ED313MEGB 3-065-583-11 Video Cassette RecorderSafety PrecautionsInstalling SLV-ED313ME GB 3-065-583-11Table of contents Unpacking Checking your model nameGetting Started Using the remote commander Setting up the remote commanderInserting the batteries To operate Set TV/ Video toConnecting the aerial Connecting the VCRAdditional connections To a TV that has audio/video input jacksTuning your TV to the VCR If your TV system is Select Selected TV system To obtain a clear picture from the VCRBefore you start… Selecting a LanguagePresetting channels To check if the channels are preset correctlyTip Presetting all receivable channels automatically Presetting channels Channel SET Presetting channels ManuallyChannel coverage System B/G System D/K Press Prog +/- to select the programme positionIf the picture is not clear Disabling unwanted programme positionsSetting the clock Started Basic Operations Playing a tapeREW Stop REW Color a Eject X Pause x Stop SystemTo set the colour system Additional tasksTo play an NTSC-recorded tape Basic Operations SLV-ED313ME GB 3-065-583-11To use the time counter Playing a tapeProg + Display REC Speed z REC Recording TV programmesTo check the remaining tape length To stop recordingTo watch another TV programme while recording To save a recordingTips To record Ntsc colour system programmesSetting the Easy Timer Recording TV programmes using the Easy Timer functionBasic Operations REC SpeedSetting or changing the Easy Clock Easy Timer knob Programme Number ButtonsProg + Do this on the VCR CommanderTo check or change the timer setting To cancel the timer settingTo use the VCR after setting the timer Tips Setting the timer manually Daily/weekly recording Search Operations To stop the Search function Searching for the current position on a tapeKnob Tape meterTo stop searching Searching using the Blank Search functionBlank section Last recorded Programme Search OperationsUsing the Index Search buttons on the remote commander Searching using the index functionPress xSTOP Using the Search Mode button and Easy Timer knob on the VCREasy Timer knob Searching using the Time Search functionTo resume normal playback Playing/searching at various speedsAdditional Operations REW SlowTo cancel the duration Setting the recording duration timeTo extend the duration RECChecking Changing/ cancelling timer settings Programme Will be cut off When the timer settings overlapAdjusting the picture Adjusting the trackingAbout the Adaptive Picture Control APC function Changing menu options Menu choicesMenu option Set this option to How to connect to record on this VCR Editing with another VCRThis VCR Recorder Other VCR Player Operation When recording on this VCR Before you start editingTo stop editing Troubleshooting Clock Power Playback Symptom RemedyAdditional Information Timer recording RecordingOthers Sapphire tape cleaner Symptoms caused by contaminated video headsHead Condition Sensor Supplied accessories SpecificationsSystem Inputs and outputsFront panel Index to parts and controlsRear panel Display windowRemote commander V, W, X, Y, Z Index